Hi , Just wondering what peoples preferences on silicones are?
I use "the works" normally as an adhesive when gluing baths and shower trays, and "dow corning 785" as a sanitary finishing Silicon.
Is it good practice that you always run a bead of Silicon up the vertical corners and around the shower tray.
We are installing a tiled marmox showerlay tray and the wife would like the corners grouted as she says the Silicon just ends up going mouldy in time.
Thanks for the replies
After some advice re shower cubicle in the photo. Silicon seal the bottom ... What about the vertical bit? Should I remove grout and Silicon? Or Silicon over the existing grout? Thanks!
Hi I've just tiled a shower area and my boss has told me to grout the tiles sitting on the tray.Should I just not put a Silicon joint there instead?Also should I run a Silicon joint in the corners from ceiling to floor also.Cheers
Hi, as per title what's the general consensus of sealing between the floor tiles and the drain housing. I'm thinking Silicon will give a better adhesion than grout. I'm using 50x50mm Mosaic's and its an impey deck and drain (square not linear).
Thanks
Martin.
mache
Thread
aus
drain
floor
grout
siliconsilicone
tile grout
usa
Hello to all,
Can anyone recommend which Silicon is best to seal my shower tray and internal corners.
I have searched the forum and found no clear winner.
Thanks.
OK today the overnighted dark-blue mosaic did not turn-up GREAT! , so we got the brand new Silicon gun out to form the expansion joints , my helper modelling nice trainers mate !!
This is not my best subject !, so how do you guys get a really professional finish on your jobs ? talk -us through it or give us your tips please ?:thumbsup:
Hi chaps.
I going for white matt 300x600 tiles with cement grey grout. Should I colour match the internal corners with same colour Silicon or go for white?
All opinions gratefully received.
Thanks.
I thought that would get your attention chaps!!
Loads of questions about siliconing..
Who does it, who doesn't?
Who won't? (its not the tilers job??)
Who can't?
Who charges extra?
Are we expected too?
Who avoids it, coz they hate doing it..
Who thinks we don't need to?
How long did it take...
Probably a typical novice question but installing a new marmox trap in a newly installed marmox shower lay tray and was wondering if the rubber seal supplied is adequate to seal the trap or if most of you like to smear with a Silicon (or equivalent) sealant onto the rubber to tray seal? I've...
Hi everyone. After sealing a plasterboard wall with Silicon sealant i managed to get quiet a bit on the surface of the board, my concern is the the adhesive will not stick to the plasterboard. if I have to try to remove it what are my options
rsparky
Thread
aus
plasterboard
sealant
siliconsilicone
surface
usa
Hi all,
Wanted some advice on the best Silicon to use. Im installing a wetroom shower screen, 1.3mx2m. There is a silver strip which attaches to the wall and is screwed in, into which the glass slides. however there is no bar for the bottom of the screen, and the instructions recomment the use...
bazza999
Thread
adhesive
aus
fixing
screen
shower
siliconsilicone
tile adhesive
usa
I am getting more and more jobs that require the removal of old mouldy Silicon around shower trays and baths. Whistle this has never been a speedy job,does anyone have any tips that will speed the job up?
Are those specialist Silicon removing corner tools safe on the baths/tray's?
Is there...
Can anyone recommend a light grey Silicon , am not that impressed with the coloration of the weber grey Silicon , it's not a great match with their grey wide-flex grout !
Like a few others on here, I too am a having a problem sourcing Silicon suitable for use with stone,unless you want order a box of 12 and want to wait 10 days for delivery. I see a few people have recommended this brand OTTOSEAL® S70 Natural Stone Silicon Sealant Jasmine (C08) - Otto-Chemie...
Wet Vs Dry polishing, which is better?
We get asked this daily. There is really no definitive answer as in most cases there is a crossover area where both are as effective as the other.
The only way to really compare the two processes is to actually talk through the products individually and...
Concrete guy
Thread
aus
diamond
dry
pads
polishing
siliconsilicone
usa
wet
I hate siliconing & can't get a decent finish, it's making my tiling look unprofesional , so wondering if theres any easy way to get a neet finish ? or at a push someone who could do it for me after each job? :thumbsup: