tile adhesive

  1. G

    Adhesive for anhydrite screed

    I`m laying 140sq metres onto anhydrite screed. Could anybody recommend a supplier for a pallet of a suitable adhesive. I am based near Chester and can collect if necessary. Thanks
  2. J

    Once tiled, how long before turning on ufh

    hi, I’m close now to finishing of the tiling in my kitchen with porcelain tiles. I am looking for some advice on when it would be safe to be able to switch the ufh back on. I have used a Topps Tiles flexible rapid set adhesive but there is no guideline for when to switch the ufh back on after...
  3. G

    Adhesive for Mosaic 70mm sq. tiles?

    I have Mapei Keraflex S1 Maxi adhesive. Will this be OK for 70mm sq. Mosaic tile on a sheet?
  4. B

    StoneFix Tile Adhesive

    How many people have used stonefix in the last year?
  5. Q

    Get your 2017 adhesive votes in..... 2 days left!

    Only 2 days to get your votes in for the most used adhesive this year.... VOTE HERE :)
  6. M

    Ardex Ardtex / Ardex 7000? (Flexible Tile Adhesive)

    I was speaking with a tiler earlier on the phone he mentioned something about a product called something like Artex or Ardex 7000 (or 7000 and something). It's a flexible tile adhesive. Anyone happen to know this product?
  7. M

    Clearing out dried tile adhesive between Tiles

    Hi My builder didn't bother doing this, meaning I will have to. What is the most effective way of clearing this out, as I have 28sqm to rectify. Without doing this, don't know where the grout supposed to fit, so not too sure why this wasn't done. Any advice appreciated would be great...
  8. P

    Adhesive spread direction

    Laying 120 x 20 plank porcelain, should i spread in direction of length so in 120 cm direction or across tile so in 20 cm direction. Would the latter give better coverage?
  9. R

    Preparation What tile adhesive to go for?

    Hi, been looking all day and no closer to finding a suitable adhesive. It's for bathroom walls, tiling on top of the current glazed tiles on 3 out of the 4 walls. 4th wall tiles have pretty much fallen off so am pulling the others off. Tiles are 600x300mm and each tile weighs 3.95kgs...
  10. W

    Tiling an ensuite floor with old adhesive

    Floor1 by Weebisto posted Dec 3, 2017 at 1:18 PM Hi all, my next job is tiling ensuite which has old adhesive still in place. Planning to cement board over and seal prior to tiling but there's disagreement as to whether or not I should remove old adhesive first Any help appreciated
  11. W

    Recommend a NICE Tile adhesive Trowel Please?

    hi, I'm looking to purchase a good quality tile trowel, can someone maybe tell me which brands/models are the best?(quality/feel/durability/finish/performance...) I currently got some cheapo wilko tile trowel I was given - It's rather crap, and I need larger notches. Don't really care about the...
  12. W

    How do you get Even Adhesive Coverage on Tile?

    I'm now tiling a really uneven wall and I'm using up mountains of adhesive to make sure that its well supported and has an even spread to it, If I Just smear the adhesive on wall and go over with the comb side After I pull the tile off to see how much of the adhesive has stuck to the tile- I'm...
  13. D

    Mapei Keraflex S1 adhesive - 'Ready for use - 14 days?'

    Hi - I'm looking at using this slow setting adhesive on a kitchen + hallway floor. On the tech spec it says 'Ready for foot traffic' after 24 hours and 'Ready for use' after 14 days. Probably a stupid question - but does that mean I'd ideally need to wait 14 days before I wheel the washing...
  14. M

    Schluter Ditra-25 matting with Keraflex Maxi S1 Slow Set Adhesive

    Is it okay to adhere Schluter Ditra-25 floor matting to a marine ply floor with Keraflex Maxi S1 slow-setting adhesive? Then use the same adhesive to adhere the floor tiles to the Ditra-25 matting? I have read on the forum not to use S2, but didn't see any mention of not using S1. Reason...

Advertisement

Top