Just been to see a job today where Jupiter underfloor heating system being used.
I have previously laid a stone floor on this about 5 years ago and have not had any comebacks.
water pipes are set within boards and then clinker terracotta tiles are loose laid on top of boards directly over heat...
jonnyc
Thread
aus
floor
floor tiling
heating
system
ufh
underfloorunderfloor heating
usa
Hi Guys
Was hoping some of you more experienced guys could advise me on the thinnest underfloor heating that I can use in a bathroom under floor tiles. In fact I could do with knowing the best way to keep the floor as low as possible when tiling and using underfloor heating? At present there is...
ceekay
Thread
aus
floor
floor tiling
flooring
heating
ufh
underfloorunderfloor heating
usa
Hi all,
I have a job to start next week and the customer has been taking advise on materials from a number of sources. The main issue is adhesive and primer for underfloor heating he has been led to believe that the primer and adhesive has to be from the same manutacturer. First ive heard of it...
Jonny_t
Thread
aus
floor
floor tiling
heating
primer
ufh
underfloorunderfloor heating
usa
A while ago i posted here saying that i'd had an underfloor heating job fail. I laid two mats under a limestone floor both myself and the sparky checked and it appeared everything was fine. After the installation was complete the customer said only one part of the floor warmed up, oh dear i...
bugs183
Thread
aus
floor
floor tiling
heating
problem
ufh
underfloorunderfloor heating
usa
Hello all,
I am an industrial Electrician/Technician and it is my intension to lay an Electric Heating mat in my conservatory as the primary/only heating source and I was just wondering if the experianced fitters among you could just confirm that the method I intend to use is correct.
1, I am...
chris79327
Thread
aus
floor
floor tiling
heating
ufh
underfloorunderfloor heating
usa
Hi all
Done 70 mtrs of 60x60 porcelain on dittra over a water underfloor heating system. I finished a couple of weeks ago but as the customer hasnt moved in yet the heating hasnt been turned on.
I was wondering what the rules are on turning the heating back on. It was on for a few weeks...
Thinking of installing some underfloor heating in my kitchen at the end of summer, and i was hoping for some advice on what sort of tile to use for best heat distribution and energy efficiency. thanks as always in advance.
:thumbsup:
jwatson
Thread
aus
bathroom
floor
floor tiling
heating
kitchen
ufh
underfloorunderfloor heating
usa
This is a bit awkward but I need someone to fit 18/20 square meters of Warmup underfloor heating mats, including laying 6mm insulation boards and latexing.
I've had a tiler booked to lay the tiles and he has allocated 2 days for this (7/8th July). I made a last-minute decision to go for...
Bilko1340
Thread
aus
essex
floor
floor tiling
heating
install
looking
ufh
underfloorunderfloor heating
usa
warmup
Hi
I am in the process of pricing up for a kitchen floor, it needs thermal boards, then electric heating mat, and tiling, the problem is the kitchen floor is half old floating floor which has been lined with Ply, and the other half is solid concrete skimmed.
The levels are all very good, im...
Captain
Thread
aus
bathroom
floor
floor tiling
heating
kitchen
kitchen floor
tiling
ufh
underfloorunderfloor heating
usa
Hello all,
I am new to the site and woukd appreciate any advice at all,
I am having an extension done and have spotted a large porcelain tile 800x800 I like. Our builder is planning to use a dry mix screed 75mm and we have got water underfloor heating planned. As it is a large area to...
SarahJ
Thread
advice
aus
dry
floor
floor tiling
heat
heating
porcelain
porcelain tile
screed
tile
ufh
underfloorunderfloor heating
usa
I have at last made a start on my lounge underfloor heating project and thought I would post a few pics as I go
The floor boards removed to expose joists.........
So at last one of my worst nightmares has come true, i have a faulty u'f'h mat.
The floor is concrete, then marmox 6mm boarding. Two electric under floor heating mats, both resistance and continuity tested by myself and the electician whilst rolled up. Now i always put testers on, and i use a...
bugs183
Thread
aus
electric
floor
floor tiling
heating
testing
ufh
underfloorunderfloor heating
usa
Hi
I am working on a selfbuild, the bathrooms upstairs are ready to start tiling.
They have a 22mm chipboard floor in the bathrooms, there is underfloor heating running through pipes clipped to the underside of the boards.
I am thinking of using 6mm hardiebacker board on top of the chipboard...
paulp4u
Thread
aus
chipboard
floor
floor tiling
heating
over
tiling
ufh
underfloorunderfloor heating
usa
I have Manifold underfloor heating with 2 layers of tiles laid on top of the screed. The 1st layer are 7mm thick and the top layer 10mm approx. The tiles need updating again to match the new kitchen. Can another layer of 6mm tiles be laid on the top again ( making 3 layers approx 23mm excluding...
jojo
Thread
aus
ceramic
ceramic tile
floor
floor tiling
heating
laying
porcelain
porcelain tile
tile
tiles
ufh
underfloorunderfloor heating
usa
Hi All,
I have been tiling now for just over 3 years however never been asked to install underfloor heating, I have heard that warmup is a good brand of underfloor heating but wondered if anyone knows the best place to purchase this as topps tiles dont seem to be that cheapp even with my trade...
john46
Thread
aus
floor
floor tiling
heating
ufh
underfloorunderfloor heating
usa
warmup
Ive just seen a job , where the make up of existing floor is : beam and block floor,insulation and then screed on top.
the builder then loose laid the underfloor water fed heating pipes on top of screed ,fixing wooden battens between the pipes so that they could screw the wood floor down on...
jonnyc
Thread
aus
best
fix
floor
floor tiling
heating
how
over
stone
ufh
underfloorunderfloor heating
usa
water