GB Walsh floor and wall tiling
GB Walsh Floor and Wall Tiling specialist tiling contractors installing large format porcelain tiles to walls, floors, staircases and facades and recommended contractor for the installation of Porcel-Thin TM 4.8mm thick porcelain tiles. We have the technical...
Bathroom wall tiling. Tiles are Villeroy and Boch unglazed porcelain in 500 mm x 300 mm sheets (with backing) made up of 5 x 3 tiles of 97 mm x 97 mm x 6mm.
Wall 1 - 1700 x 1500
Wall 2 - 700 x 1500
Wall 3 - 700 x 1500
Small bath ledge at tap end - 700 x 100
Metal tile trim at perimeters (top...
ndr2002
Thread
bath
london
london tiler
tiler in london
tilingwallwalltiling
Hi,
I have a bathroom that needs wall tiling near Wembley.
The area to be tiled is approx 10 m2 with a vertical mosaic of around 2 m2.
The walls are plasterboard and the bath/shower walls where the shower will spray will need to be waterproofed.
Would anyone here like to quote for this or...
Hi
I have a shopfitting job starting on Monday 27th October in Peterbrough (short notice I know) and am in need of a tiler to work alongside me.
There is 150m2 of 450x450mm porcelain floor tiling, 80m2 of wall tiling and about 60 linear metres of skirting tiles.
As I have a lot of work...
Craig Vaughan
Thread
aus
find a tiler
floor
floor tiling
needed
tiler
tilers directory
tiling
usa
wallwalltiling
Hi,
Would be interested in getting quotes for waterproofing and tiling a shower area & basin splashback in a very small bathroom. Based in Newbury, West Berkshire.
Need expertise in tanking - as I've spoken to a couple of characters who seemed to have no knowledge of waterproofing...
I have recently had a new kitchen installed at my home in earls barton near wellingborough. When we tried to remove the old tiles it was wrecking the walls so they were left on and we now need to tile over the old tiles as the new kitchen is now in.
Ideally we would like the job done in the...
Rob Smith
Thread
aus
bathroom
kitchen
needed
tiling
usa
wallwalltiling
Hi,
I am looking for a good tiler in Bristol to fit tiles in my kitchen, utility,hall space, wc, and two toilets upstairs.
Kitchen is - 3.770m x 3.484m (12'4" x 11'5")
I don't know the exact measurements of utility and toilets though. I can provide floor plan via PM.
I am planning to buy...
asif
Thread
aus
bristol
floor
floor tilingtiling
usa
wallwalltiling
Hello.. Just wanted to know how many bags of Keraflex Maxi 20kg bags i would need to tile approx 16.5sqm of wall tiling.
Tiles will be 400x250x8mm. Would a 6mm notched trowel suffice?
Thanks,
Makaveli
I need a tiler to help finish a commercial job in Colchester, due to timescales slipping and new jobs starting I now need to be on 2 jobs 200 miles apart at the same time! Most of the wall tiling is straight forward, there are 2 toilets to do but there is a wall with a couple of doors to go...
Am going to be asked to half tile some Health Club changing rooms using quartz stone tiles, Not used these before, but have heard that they can be a bit of a nightmare. Before I agree to do the job can anybody give me some advice on 1, Adhesive (I was thinking 2 part ) 2, Cutting. I use a...
Hi all, been long time since posting, just need your advise on ASET level 1 national award in wall tiling skills, is it recognised anywhere or does it have an equivilent such as nvq level 1.
Hello, I'm looking for a professional tiler who can tile my bathroom but also plumb in new radiators and possibly new bath, I may also require a television on the wall built in with the tiles around it. I'm looking for someone who can come and give me a quote and some advice - can anyone help...
Suzanna
Thread
aus
floor
floor tiling
plumbing
required
tiling
usa
wallwalltiling
I'v attached a picture of a wall I'm tiling that includes my en-suite door, looking at it from left to write the widt is 940mm to the door, the door opening is 740mm and the other side of the door is 960mm, my tile widtht is 275mm, basically my question is to ensure i dont have really small cuts...
PMM9BRO
Thread
advice
aus
needed
out
setting
setting out
tilers
tiling
usa
wallwalltiling
Hi All,
I have boarded a wall with aqua panel, dot and dabbed and then plugged and screwed to give a mechanical fixing.
Despite best efforts in ensuring all boards were level and no lippage between the joints, one of the boards seems to have pulled in too much along the top . I’ve put a...
rupert
Thread
aus
format
large
large format
levelling
out
panel
tiling
usa
wallwalltiling
Due to start in July, I am looking for a good experienced team to doing the wall and floor tiling, and another team for in-situ (floors only) terrazzo on a medium size contract situated in the city centre. For further information, can you contact me directly via pm, for further details. As...
Pebbs
Thread
aus
floor
floor tiling
glasgow
tiling
usa
wallwalltiling
Am about to DIY 406 x 203 x 12mm tumbled limestone onto wall - (please bear with me I know you will say get a pro to do it but unfortunately I live in a very remote location & whilst I can get the tiles shipped here there are no pros available). Have tiled before with large format ceramic but...
Hi - I'me using three sizes of wall tile to create a random look in a bathroom. I've got a pattern to follow but I'm a bit stuck on the best way to set it out - is there a straightforward way of getting a starting level? At the minute I've got three levels to give a run across the wall but this...
Public Thread!: Poor Tiling Workmanship by DIY and Rogue Traders
This is a public thread. So please do NOT include personal information of who's done the job, where it's been done, etc. Only include information related to the workmanship. What's been done wrong, what should have been done, how...
aus
bathroom
diy
do it yourself
floor
floor tiling
job
jobs
kitchen
poor tiling
public
rogue
thread
tilingtiling jobs
tiling work
usa
walltilingwalls and floor
work
workmanship
Hello! I am completely new to home renovation and am currently having an ensuite bathroom made. I was thinking of having the walls outwith the shower area (which will be floor to ceiling tiled) half tiled. However, the white gloss tiles I have ordered (40cm by 25cm) do not have bullnose tiles...