wall

  1. D

    split slate.any recommendations on a good colour enhancer and sealer in a matt finish.

    hi there just finished an outside wall in split slate.any recommendations on a good colour enhancer and sealer in a matt finish.
  2. C

    Loose wall tiles

    Hi all, I had my bathroom tiled about 5 months ago and yesterday I noticed cracking in the caulk around the window reveal. When I push on the tiles around it, it closes up the crack (even tiles further down), so looks like multiple tiles have debonded from the wall, almost like the wall is...
  3. J

    Tiles cracking on new shower nib wall

    Hi, We have recently had our bathroom updated and a new Brick nib wall put in and tiled. Within 6 weeks it had cracked on both sides and metal trim had come away. The bathroom renovator came back and replaced the tiles with new adhesive (type used in pools) but I have noticed after 3 weeks it...
  4. E

    Tub position vs wall

    The lip of this tub is a bit beyond the wallboard, but there's no way to fix it without relocating the tub or redoing an entire wall of the bathroom This wallboard is in line with the rest of the wall. Is there any other fix? The gap is about 6 mm.
  5. M

    Tiling over removed wall

    Hi, I’ve taken down an interior wall that reveals a dpm. I need to tile over this area. What should I do with this to get the prep right?
  6. J

    My 1st Job Wall Around Shower Tray Not Square

    Shower walls are not 90' running out 25mm on a 760mm wide tray. I don't want to sink shower tray into the wall. I am going to use SDS insulated boards and tile them. Any ideas how to square off the wall making up the 25mm before tiling ?
  7. E

    Poor preparation for shower wall tiling?

    Who is at fault here? Our builders built a stud wall and secured backer board to it. Our tiler then proceeded to tile onto it. We had multiple tiles crack along one vertical line where the two backer boards met. Upon removing tiles, one backer board was only secured with 6 screws and there were...
  8. J

    Tile Boards to Masonry wall

    Hi all. Am currently replacing bathroom wall tiles. Walls are a mixture of stud and masony. Taking off the old tiles resulted in replacing the old plasterboard with STS tile boards. All done. Coming to masony wall behing the toilet, a little of the plaster has come away from this wall. It says...
  9. S

    Hi short of 20 250 x 400 isodore white wall tiles LA50815 .made by

    Hi wonder if anyone can help .I need short of 20 wall tiles ,which as youve guessed have been discontinued.They were from Laura Ashley and marketed as ISODORE WHITE LA50815 (white tile with black floral design) i have attached a photo for identification..Thanks
  10. L

    B&Q Cimenti Grey Matt Ceramic Wall Tiles

    Good Evening, does anyone have any of these tiles? Product code 3663602848608
  11. S

    Wall prep question

    Hi been browsing the forum, lots of good advice. I’m after some myself of you don’t mind. retiling my bathroom. Just the bath area so three walls 1700x 1700, 1700x700 and 1700x700. Taken off the old tiles and plasterboard. It’s stud walls with timbers at 600mm. I have some 12.5mm wedi style...
  12. M

    Tiling treated wall with zinsser 123

    Hi really hope you can help, I have a small kitchen project and need to tile between worktop and kitchen cabinets, the old tiles have been removed and the tiled area has been patched as some plaster was displaced when the old tiles removed, all the walls have been treated with zinsser 123...
  13. F

    Does a cement and sand covered wall need tanking?

    Hi, I'm in a process of prepping before retiling my bathroom. I've stripped the old tiles with adhesive down to some old plaster (I think it is an old sand and cement coat). I've also installed the STS tile backing boards on the other wall where the new bath with a shower will go. See the...
  14. F

    hexagon wall tiles - bad idea for beginner?

    I want to tile the bathroom myself, two walls and inside the windows - seen some really nice white hexagon tiles i think would look good with a light grey grout... but please tell me now if this is bad idea for a beginner? I've done a couple of small DIY tiling jobs in my own home. My main...
  15. P

    Wedi board behind wall hung pan

    Hello gents! Long time lurker, first time poster.... I’m just fitting out our en-suite bathroom using Wedi board on three walls and standard plasterboard on the fourth. Most of the Wedi will be plastered and painted with only the shower area being tiled (I’ve used Wedi all round because of the...
  16. H

    Best tile adhesive for Heavy Terrazzo tiles On wall

    I am installing heavy terrazzo tiles (size 400mm x400mm, and 20mm thick) onto lower part of bathroom wall up to height of 1200mm and also on the bathroom floor. They weigh 48kg/m2!. I am using the approriate backer boards on the floor and wall. But I am unsure as to the best adhesive to use...
  17. F

    wall preparation

    Id like advice on preparing this wall. The old adhesive is proud by 5mm to 10mm in places from the wall. What would you do to prepare this for 200x500 ceramic tiles. only half the wall had been previously tiled and its in good condition but half is this
  18. G

    Bathroom wall tile repair, unable to match tile size.

    In 2014 I had my bathroom re-titled. I'm having my shower replaced and some of the tiles need to be replaced. The tiles on the wall are white gloss tiles 248mm x 328mm (purchased from ToppsTiles). The only size I can locate is 250mm x 330mm. Does anyone have any suggestions of how I can get...
  19. C

    Feedback on cloakroom WC wall tiling

    Our cloakroom WC has just been tiled (pictures attached) and our contractor says he 'doesn't see an issue' with the gaps between the tiles and the wall (5-6mm gap). There's also void space visible behind tiles i.e. large gaps with no adhesive. As someone with no experience tiling, I'd have...
  20. J

    What size trowel to create 5mm adhesive bed for wall tiles

    Hi Due to start a DIY tiling job in my kitchen this weekend. Have had worktops fitted and in some places there are 10mm gaps between wall and worktop (where walls are out of square and all over the place). Using 100x200mm metro tiles which are 5mm thick and would like to put down a bed of...

Advertisement

Top