Schlüter-Systems has seen a dramatic 40% increase in turnover for its wet room range after creating all-in-one kits for tilers.
Click here for more information on this article.
For other news, checkout Tile News Blog.
Hi all
I have a quick question for you.
Im having to strip out a leaking wet room which was done using a tile safe membrane that had been cut at floor level causing the leak.
Im going to remove the floor tiles and re membrane with a 75mm up stand up the wall. The walls are cement board 12mm...
ivorbigun0
Thread
aus
room
tank
tanking
usa
waterproofing
wetwetroomwetroom
Hi
I fitted a wetroom myself last year. Used a marmox tray with proper cement addy & grout. Unfortunately I noticed this afternoon that the tiles have lifted a a loud squelching sound can be heard. I think the fault mainly is not using sealant around around the edge of the drain where it meets...
jimie
Thread
aus
debonding
help
lifting
please
porcelain
porcelain tile
porcelain tiles
room
tile
tiles
usa
wetwetroom
Hi guys, apologies if I've posted this in the wrong section but I thought it might be the best place for advice. I'm currently on a refurb job in London SE18 Woolwich. Customer wants a wet room installed in an upstairs odd shaped room, 8'x5'x8' "roughly" I've not done a wet room before and...
BOFH
Thread
aus
london
london tiler
room
small
tiler in london
usa
wetwetroom
Hi
About 20 years ago the council fitted a wet room which has been fine until now,
I've replaced some tiles on one wall, im now looking at replacing the material they used to bridge the gap between the non slip floor and the tiles and what they used as a bead between the floor and the...
Hi All
I had a wet room installed two years ago, by a member of the family (builder by trade) in the en suite of our Master Bedroom, located on the third floor of the house.
It was prepared very well, with 3/4" Marine Ply boards fixed onto floorboards, a high quality thick and rubberised (and...
Smudger 57
Thread
advice
aus
floor
floor tiling
house
needed
room
usa
wetwetroom
Hi, newbie here.
Am planning a wetroom in the new extension.
Currently specifying the floor. Obviously the tray part of the wet room will sit on the joists. The tray is 20mm deep. what material should I spec for the remainder of the floor? WBP ply, 20mm thick? or are there better substrates to...
As a newbie to a Wet Room I have just inherited I am hoping you can help me. I have a 2/3 Bar shower and its blasting the grout out between the tiles. I patiently got all the grout out using a dremel directly under the shower head . Left for a week to make sure it was dry, re grouted with BAL...
plug_it_in
Thread
aus
grout
grouting
problem
room
tile grout
usa
wetwetroom
I am soon to start a job which will have a underfloor heating mat in a wet room. I am wondering what is thebest way to install it from floor to tray former height. The heating mat will not be going on the tray former. Thanks ollie
Ollie02948
Thread
aus
floor
floor tiling
heating
room
ufh
underfloor
underfloor heating
usa
wetwetroom
Hi guys, we have a wet room to do and it's not something I've done before so I could use a few pointers. The room itself is a triangle of sorts and the shower will be sited at the pointy end :thumbsup:
The room is upstairs in an old property over 7x2 joists. I intend to nog out the joists...
Hi Guys,
I'm after a tiler who can quote for a small shower-room for me approx 9ft x 6ft. Was hoping to get someone who uses a wetroom system that will not raise the floor height to much as I want to use a thin ufh as well. I will be undertaking all the plumbing, joinery and electrics as I'm a...
ceekay
Thread
aus
find a tiler
room
tiler
tiler wanted
tilers directory
usa
wanted
wetwetroom
Hi
Have been a member for a while but never posted. Many of my local suppliers have either gone bust or keep changing their suppliers.
Im looking for decent recommendations on wet room floor kits, level access and raised. I like to use what I know but wanted to hear of any really good systems I...
Hi there, this is my first post. I don't like to start on a new forum with questions, but hopefully I can provide some answers in the near future or at least experiences after my tiling episodes.
So my query, I have a bathroom, currently 18mm chipboard floor. plasterboard walls. (unplastered)...
installed preformed tray with falls for wet room floor. As tiles are to be mitred into the drain should the cut edges of tile be sanded in any way to give a less sharp edge if so is there a specific tool for this please?
regards Alf
Hi All,
My mother-in-law wants her ground floor bathroom converted to a wetroom. The room has a wooden floor and has been told that she would require a concrete base laid. Is this true?
Hi All,
Im fitting a wetroom with a toilet and basin in a 3m x3m enclosed area in the garage. The area has been studded out using 3 x2 timber , the walls of the shower area have been fitted using hardibacker 12.5mm boards, the other walls are plasterboarded . The floor ,which has ceramic tiles...
ran
Thread
aus
installation
room
usa
wetwetroomwetroom installation