would

I have a bathroom just now that's half height tiles above the bath. I am changing the bath and also fitting a shower mixer, bath will be switched around and shower mixer will go on the left wall. So I am going to continue the tiling to the ceiling for the shower area in the bath. Please see...

Hi I am renovating my house here in Italy, in the spring I took up the existing floor screed on the first floor and have installed a wet UFH system. This was screeded using a self-levelling cementitious product from Fassa Bortolo called SA500. The screed was laid on the 23rd May to a thickness...

I don't have a clue, so some advice would be appreciated

So, I do the tiling for a firm who does disabled bathrooms for the council, they usally use backer boards on the walls etc. But I walked in today with with the walls totally f***ed stud walls with half the board missing for the shower pipes 3 other walls where you could see the brick, half...

I've contemplating filling this with Silicon, but something tells me that's not correct?

This is on Quest channel now. Discuss :D

What shall I do to fix this without re tiling ?

There's a lot to box !?

Hi guys. Am I a ****? Bumped into a builder in my local and he sees I do tiling so asks me to price up to tile 7 showers in a local hotel he's refurbing. Tells me they're 800 quadrants, all new stud work, moisture resistant plasterboard yada yada. 250x325 bumpy white ceramics cheap as chips from...

As the title asks, what’s the dream. Mine would be a modest cottage in deepest Cumbria with a bit of land for camping and a few barns to renovate and let out to holiday makers. Not too much stress, plenty of clean air and lots of walking with the dogs. That’s what I’m working for, hopefully...

Ive bought these beveled edged tiles and setting out leaves me with a problem. As pictured ive set the tiles out this way to minimise the cuts, I have 1 full tile at the base of the picture then i was going to 2 halves then 1 full ect ect but its left me with a long cut ( in yellow ) and if i...

Good flat floor, 600x600 porcelain, just a few strips of uhf. About 16m² Here's a pic

Hi all. In line with my other thread asking for some opinions on tiling layouts for my bathroom reno redo, here are some pictures showing why I’m not happy with the current install. Let me know if I’m just being fussy. I supplied the tile, which was approved by the tiler (who was also the...

I have completed tiling and now i am ready to fit my Bath but as per bloody usual i have messed up i have tiled the wall that the bath will sit against too close to the floor I believe...I know the bath will have to sit on a batton that is fixed to the wall but as explained i have tiled most f...

Undecided whether to rip this all up and replace with 18mm ply then overboard with 6mm NMP or similar. Or sure it up with plenty of screws and overboard with 12mm NMP or similar. The ply that is down at the moment is some 15mm with no deflection that I can detect really. But this house is...

Answer....... ALL DAY LONG!

Tiling nightmare continues... These were fixed at the start of the month and in the last few days this crack has appeared. I think a crack (or two) might be appearing in the tile above too. We're not in a good place with this. I've no confidence in our tiler's ability (see previous thread)...

Hi there! I finally decide to plan the layout from the entry door, with full tiles across the center of the hall and going from there into the adjoining rooms. With the sitting room works perfect but in the kitchen/dinning room tiles would be too small on one side (as seen in pics). The grout...

As the title says really..... Would you consider working abroad for a short period of time? This is not a thread offering work!, just to see what others thoughts or experiences of it are. I was contacted by a US firm asking if I would be available at short notice over the next month to travel...

turned up to tile a floor at a customers house and was greeted to this!! I walked!!