Discuss 50m floor in the Canada Tile Advice area at TilersForums.com.

O

One Day

It's a funny one as I only do work for him on a slightly reduced day rate, often small jobs kitchens etc which I use to fill in gaps in the schedule so I can't suddenly ask for more on this one particular job!

You can tell him the going rate is at least 25/sqm and take it from there.
Or you could do it for 10/sqm and help him fill one of the tanks on the supercars!
 
O

One Day

I had a 350sqm floor on anhydrite.
I agonised over the price because the total looked so large but in the end went in at 25/m + materials and promised a perfect job.
Glad I did because it took longer than it should have done.
Issues around scheduling, other trades in the way, floor not as flat as should be...
I did ok in the end, but not as ok as it "should" have been....
 

Reply to 50m floor in the Canada Tile Advice area at TilersForums.com

There are similar tiling threads here

Hi. I've just used Mapei Ultimate Leveller 1210 to cover a very irregular concrete floor in our...
Replies
1
Views
359
Hello I'm new to tiling my first flooring job it's 42sqm in 600x 200 floor tiles (wood effect)...
Replies
4
Views
2K
Hi all , it’s been years since last posted for advice and your methods . My question is this ...
Replies
5
Views
508
    • Like
Wall & Floor Tiler Queensland Australia Tile Right About the role Seeking a Wall & Floor Tiler...
Replies
2
Views
1K
Hi all, I've laid some Arditex NA over the kitchen floor area (not under cabinets. The area is...
Replies
3
Views
1K

Advertisement

Tilers Forums on FB

...
Top