Advice needed for mosaic splash backs

[GoneGuy]

Mapei adhesives are readily available in most screwfix stores.

 

[Rob70]

Can anyone advise on best way to cut these small mosaics, I'll cut out the sockets size and I will need to fill in the rest of the socket with the cut mosaics ? Also would I need a centre point as these are for splashbacks around the kitchen?

 

[GoneGuy]

I use montolit tile and glass nippers.
And I also centred as usual but best to ask @MissTiler.

 

[MTiler]

I use montolit tile and glass nippers.
And I also centred as usual but best to ask @MissTiler.

I use Leponitt glass nippers to cut glass plus Rubi porc nippers to cut stone mosaics and chunky glass etc, also a Montolit cutter with a mosaic mat, plus a grinder with a glass blade.

 

[Rob70]

I'm going to start the tiles at the worktop edge and as these tiles don't have a straight edge is it best to cut them in or cut the sheet down so its level with worktop?

 

[Rob70]

I'm going to start the tiles at the worktop edge and as these tiles don't have a straight edge is it best to cut them in or cut the sheet down so its level with worktop?

Actually, would like some advice on the best starting position, i.e the centre of cooker between hob and fan or at worktop edge ?

 

[Giuseppe Maffei]

it depends on which kind of edge finishing are you looking for. If the cut will be exposed I recommend a specific blade (that is slow) but is capable to give you factory edge on Porcelain, glass, stones and even metal mosaic. The blade is our Montolit CPF Perfetto. If the cut won't be exposed, Montolit Masterpiuma or Minipiuma + rubber Mat item 58 will work. You'll need a nipper to cut the stone pcs

 

[Giuseppe Maffei]

it depends on which kind of edge finishing are you looking for. If the cut will be exposed I recommend a specific blade (that is slow) but is capable to give you factory edge on Porcelain, glass, stones and even metal mosaic. The blade is our Montolit CPF Perfetto. If the cut won't be exposed, Montolit Masterpiuma or Minipiuma + rubber Mat item 58 will work. You'll need a nipper to cut the stone pcs