angle grinder cutting discs

[boxhead]

hi lads,im after a general allrounder cutting disc for my angle grinder to cut stone,glass,ceramic and porcelain .have you any recommendations. someone recommended the tile slysa.any views on this if so which one.cheers all

 

[mistral]

I use the Norton discs, not cheap but they are really good.

 

[boxhead]

cheers, ill look them up on the net.:8:

 

[mistral]

cheers, ill look them up on the net.:8:

You can get them at Jewsons.

 

[hillhead]

The marcrist blades from tradetiler are hard to beat too.!

 

[heavytrevy]

I recomend the Dimas Mizer smooth blade, cuts everything with ease and no chips :hurray:

Trev

 

[hillhead]

I recomend the Dimas Mizer smooth blade, cuts everything with ease and no chips :hurray:
Trev

where do you buy them trev?

 

[doug boardley]

bosch ones last forever

 

[milan11]

The marcrist blades from tradetiler are hard to beat too.!

Very true.

Marcrist 850 blue one is so far the best blade on the market.

However, for stone dry cutting I use Sankyo blade sometimes instead.

 

[woodie]

hi buddy i have used the same disc for about three years and it's still going strong, it's a turbo blade from screwfix (norton i think it's been so long since i bought it i can't remember) it's a thin blade and it'll cut through anything with no chips and it's very quick :8: