ASHP Supply & CU Setup Electrical Advice

Tilers Forums Official Sponsors

ASHP Supply & CU Setup Discussion ThreadASHP Supply & CU Setup Electrical Advice

Evening all,

Just after a sense-check before I commit & send the quote.

I’ve been asked to run in an SWA to feed a small CU that’ll sit inside an extension on the side of the house for the ASHP from a Tesla Gateway.

The customer has said the heat pump guys have asked for 2x 16A & 1x 6A circuits for the heat pump, immersion & control gear.

My plan was to fit a 40A C Curve MCB in the Tesla Gateway, run in the 10mm SWA (roughly 15m) then one of these (FuseBox RTB630302M DP RCD TYPE B 63A 30mA - https://www.fusebox.shop/products/fusebox-rtb630302-dp-rcd-a-type-63a-30ma) as a main switch in ASHP CU to satisfy the Type B RCD that Valliant ask for & then have 3x MCBs for the 3 circuits (1x 16A C Curve for the heat pump, 1x 16A B Curve for the immersion & 1x 6A B Curve for the control gear).

Does that sound about right?! I haven’t done an ASHP supply before.

ASHP Supply & CU Setup for the original thread on Electricians Forums
 

Advertisement

Thread Information

Title
ASHP Supply & CU Setup Electrical Advice
Prefix
N/A
Forum
Electrical Advice
Start date
Last reply date
Replies
0

Thread Tags

Advertisement

UK Tiling Forum

Thread statistics

Created
Lou,
Replies
0
Views
80

Thread statistics

Created
Lou,
Replies
0
Views
80

Weekly Email Digest

Back