Discuss Bad Tiling where do I stand? in the Canada Tile Advice area at TilersForums.com.

dynamictiling

TF
Esteemed
167
578
glasgow
That’s what I’m hoping for to be honest so o

The new bath is in and everything else due to be fitted back next weds after the plasterer coming on Tues.
The reason the plastering is being done while floor tiles are being fitted is because it’s the soonest I could get this particular person out he’s fully booked. He did some work at my mums house very clean tidy and good job and great reviews in general. I asked if I would need to delay floor tiling he said no he tapes everything off and to be fair the floor was meant to be finished so good to walk on etc but yes I would of rather it was more organised


Be careful as plastering is ment to be left for 1-2 weeks for it to fully cure prior to tiling.

I would recommend leaving it for a couple of days (no heating in room) and then use a heater after two days to insure it is fully dried out. If you use a heater or dehumidifier too soon the plaster will dry out to quick and crack!


Sorry to hear about your circumstances, personally I would use another tiler. Make sure you are there for the prep work. Plaster needs a bit of prep prior to tiling. It needs 'keyed' and bonded. Key is like a scratch coat to help the tiles stick. Also something to be aware of is that SBR bonding is used. Make sure it isn't PVA!!! if pva gets wet it, it reverts back to liquid form and you have problems.


Best of luck with your project.
 
C

Charlotte8787

Be careful as plastering is ment to be left for 1-2 weeks for it to fully cure prior to tiling.

I would recommend leaving it for a couple of days (no heating in room) and then use a heater after two days to insure it is fully dried out. If you use a heater or dehumidifier too soon the plaster will dry out to quick and crack!


Sorry to hear about your circumstances, personally I would use another tiler. Make sure you are there for the prep work. Plaster needs a bit of prep prior to tiling. It needs 'keyed' and bonded. Key is like a scratch coat to help the tiles stick. Also something to be aware of is that SBR bonding is used. Make sure it isn't PVA!!! if pva gets wet it, it reverts back to liquid form and you have problems.


Best of luck with your project.

Thank you I’m sure in a few weeks I will be able to laugh about this. I’ve got a few people coming to quote to finish the job etc but as per usual haven’t been able to get hold of the current tiler to discuss the issues. Thanks for the advice on the plastering I’m in no hurry to tile or paint it will just be super happy something actually finished
 
C

Charlotte8787

Sorry to hear about your plight people professing to be tilers bull rubbish best off word of mouth don’t know where your job is but if it’s close to Liverpool I’ll sort it

Ah thank you, but I’m a bit of a drive away. I’m sure it will get sorted if all else fails I will move haha
 
57
258
Cheshire
Hi Charlotte, this guy has treated you very badly and I'd advise you to jettison him and his rotten attitude and find someone else. When I was single and bought my first little house I had the runaround from several 'tradesmen' and it was so frustrating that I enrolled on a bricklaying course, found I enjoyed it and did my level 2,trained in tiling, carried on and now have a HNC in construction! In hindsight maybe they did me a favour :) x
 

Reply to Bad Tiling where do I stand? in the Canada Tile Advice area at TilersForums.com

Subscribe to Tilers Forums

There are similar tiling threads here

    • Like
We had a wet room fitted by a large company. We have issues with a few large steps where the...
Replies
3
Views
345
Hi. Hoping you al. Can help me. I have an issue where I had a bathroom built and a shower...
Replies
8
Views
1K
Hi people I'm in desperate need of advice So my builder who I let go due to poor work has...
Replies
3
Views
1K
Where to get a Tiling NVQ Hi,I did the 4wk course in Warrington back in Sept, being a plasterer...
Replies
0
Views
876
    • Like
Hello, I did some reading here and there, but the opinions seem to diverge at some point and I...
Replies
2
Views
1K

Advertisement

Thread Information

Title
Bad Tiling where do I stand?
Prefix
N/A
Forum
Canada Tile Advice
Start date
Last reply date
Replies
45

Which tile adhesive brand did you use most this year?

  • Palace

    Votes: 9 5.8%
  • Kerakoll

    Votes: 15 9.6%
  • Ardex

    Votes: 11 7.1%
  • Mapei

    Votes: 46 29.5%
  • Ultra Tile

    Votes: 19 12.2%
  • BAL

    Votes: 37 23.7%
  • Wedi

    Votes: 4 2.6%
  • Benfer

    Votes: 2 1.3%
  • Tilemaster

    Votes: 21 13.5%
  • Weber

    Votes: 18 11.5%
  • Other (any other brand not listed)

    Votes: 17 10.9%
  • Nicobond

    Votes: 7 4.5%
  • Norcros

    Votes: 3 1.9%
  • Kelmore

    Votes: 4 2.6%
Top