Betamat?

[Old Mod]

Evening all,
I've been to see a floor that is failing and when I asked about the make up of the floor they said that the 18mm ply had a Betamat overlay.
The floor in question is a bathroom on the first floor with wet UFH under the ply.
Can anyone tell me what a Betamat overlay is please?
I've never heard this term before, have any of you guys?
Thanks.

 

[Dave]

Not one I've heard of , you sure that's the name Marc !

 

[Old Mod]

Well I was a bit baffled too!
This is an extract from the email I was sent.
This is the make up of the floor, bottom to top,

Quote
"Plastered ceiling with coving (no movement or cracking)
8" x 2" joists (with infil insulation from games room below
15 mm sterling board
2" x 1" batons with underfloor heating between
18 mm ply
Betamat overlay
Bathroom tiles.
"Quote

 

[Dave]

There is one made by Beava ? ... Think it's called Sandimat or summit like that...

 

[Rizzle from the Portizzle]

Evening all,
I've been to see a floor that is failing and when I asked about the make up of the floor they said that the 18mm ply had a Betamat overlay.
The floor in question is a bathroom on the first floor with wet UFH under the ply.
Can anyone tell me what a Betamat overlay is please?
I've never heard this term before, have any of you guys?
Thanks.

think i once owed a video recoder with the same name they may well of used the left over tape .that never worked out ever .sounds like a german name the name escapes me at the moment trying to think of there name they pulled out of the uk think i starts with pci or simular

 

[Dave]

think i once owed a video recoder with the same name they may well of used the left over tape .that never worked out ever .sounds like a german name the name escapes me at the moment trying to think of there name they pulled out of the uk think i starts with pci or simular

Betmax lol.. Was your **** on the them tapes Ray.

 

[Old Mod]

There is one made by Beava ? ... Think it's called Sandimat or summit like that...

Ok cheers Dave I'll see if I can find it.
I think I'll need to go back to them and see if I can't contact the contractor direct.
Thanks!

 

[Old Mod]

think i once owed a video recoder with the same name they may well of used the left over tape .that never worked out ever .sounds like a german name the name escapes me at the moment trying to think of there name they pulled out of the uk think i starts with pci or simular

Haha Ray if u'd given any other answer I'd of been sadly disappointed! Hahaha
.......and thank you!
At least I have somewhere to start looking (second hand shops!) haha

 

[Dave]

Ok cheers Dave I'll see if I can find it.
I think I'll need to go back to them and see if I can't contact the contractor direct.
Thanks!

I would ..

 

[Old Mod]

Yeah I will, just didn't want to seem clueless so quickly

 

[Dave]

Yeah I will, just didn't want to seem clueless so quickly

I don't think it's clueless , just state it's a product you are not familiar with and do you have a data sheet etc.

 

[White Room]

I've been doing a search on the net and nothing comes up concerning floors....some medical stuff

 

[Old Mod]

Fair point, normally if something sounds unfamiliar I'll think or research on it first, just in case it's a generic term I've not heard of rather than a brand.
The client also happens to be a Chartered Surveyor and not entirely daft.
Don't know what he specialises in tho.
This is one of four bathroom floors in the property that are on the verge of catastrophic failures, this is the one in best condition that I'm to deal with first.
Then the rest will follow.
They've had the original tile company back and all they did was re grout the cracked floors.
Well the grout cracked again within two weeks, and that was their one and only chance to rectify.
This renovation is barely 2 yrs old!

 

[Dave]

Let us know how you get on and if there is in fact a betamat

 

[Old Mod]

I've been doing a search on the net and nothing comes up concerning floors....some medical stuff

Yeah that's all I found Mark,
Thanks mate!

 

[Old Mod]

Let us know how you get on and if there is in fact a betamat

Yes of course I will,
Cheers Dave, Mark appreciate your help...... Yes and you Ray!

 

[Rizzle from the Portizzle]

Betmax lol.. Was your **** on the them tapes Ray.

no it was down loaded any were i could get it never made a vid just could not hold

Betmax lol.. Was your **** on the them tapes Ray.

no i could not hold the camara and be a god at the same time .oh my god oh my god oh my god iam arriving them posh birds say it with class

 

[Rizzle from the Portizzle]

i think this was the pci crack matting

 

[Dave]

i think this was the pci crack matting

Nope not the PCI one.. I can't recall the name but it wasn't that .

 

[Old Mod]

i think this was the pci crack matting

Cheers Ray,
obviously it needs further research, but with what yourself and Dave have come up with, it gives me a direction to go in!
Thanks all!

 

[Dave]

PCI was Pecilastic mat.

 

[Old Mod]

......oh no what have I started? haha

 

[Rizzle from the Portizzle]

ok being a little bit dislexses some time seeing number and letters the wrong way round i did this the wrong way round spelling starting at a and working forward the the only one that comes up is ditra over lay matting .so they just miss spelled it betra ditra easy to do if you are just righting the spec you here

 

[Old Mod]

ok being a little bit dislexses some time seeing number and letters the wrong way round i did this the wrong way round spelling starting at a and working forward the the only one that comes up is ditra over lay matting .so they just miss spelled it betra ditra easy to do if you are just righting the spec you here

That's actually a bloody marvellous answer Ray,
Thank u very much!
......so whys the floor failing then? Haha
I was hoping it'd be something as simple as cranking up the heat in the floors before the fitters left the drive!

 

[Dave]

If Ditra fails , then more than likely deflection.