bit help

[kapitan]

one last tip do not let excess sealer dry on the stone surface !

 

[UKTT Darren]

Make sure the tiles are bone dry before applying sealers, Tip for pencil lines washing off natural stone cuts in your wet saw, put a 10mm wheel in your dry cutter and scribe the line you have marked with your pencil, just follow that groove man

 

[tony TLC]

good tip works very well with black slate i score with a no more ply scorer same job but a but quicker

 

[UKTT Darren]

If you let the sealer dry in a small puddle it will dry like a glass lense, make sure the sealer is applied evenly across the surface with a roller, you can seal before you lay them and allow to dry at first if you think you are going to be a little messy with adhesive spills