Clinker Page: 2

[GazTech]

Hi Anthony,

I started the thread. The clinker is okay , you just need to keep the nut tight that holds the cutter on the rails as I find it "bows" sometimes if it's loose. It's a heavy piece of kit and a little awkward to see the the marks on the tile. I used a Rubi on a NETT course recently and I'm kicking myself i hadn't used one of them before the Clinker. For the money it's good, I won't get rid of it, I recently cracked a bit of granite with it. I'll get a Rubi for the ceramics and porcelain in the near future.

Pete

I presume you got the instructions for it Pete ?

 

[DHTiling]

Hi Anthony,

I started the thread. The clinker is okay , you just need to keep the nut tight that holds the cutter on the rails as I find it "bows" sometimes if it's loose. It's a heavy piece of kit and a little awkward to see the the marks on the tile. I used a Rubi on a NETT course recently and I'm kicking myself i hadn't used one of them before the Clinker. For the money it's good, I won't get rid of it, I recently cracked a bit of granite with it. I'll get a Rubi for the ceramics and porcelain in the near future.

Pete

highly recommend getting a rubi dry cutter.. you will not regret getting it...............dave..

 

[Peter Woods]

Gaz,

thanks for the manual

Pete