Discuss Commercial or domestic in the Canada Tile Advice area at TilersForums.com.

B

bugs183

Yes it does have it moments though!
My dad finished a massive sand and cement floor in Coventry University years ago, they finished it, then next day the labourers got a kango hammer straight up the middle of it as they'd left a drain out.
But on the other hand i remember being handed 750m2 of walls with h trim off the floor and no cuts at the top as it has a suspended ceiling and just left to get on with it.
Lovely easy well prepared work, just like 600x300 stone on bumpy painted plaster in someone's bathroom!! :mad2:
 
Yes it does have it moments though!
My dad finished a massive sand and cement floor in Coventry University years ago, they finished it, then next day the labourers got a kango hammer straight up the middle of it as they'd left a drain out.
But on the other hand i remember being handed 750m2 of walls with h trim off the floor and no cuts at the top as it has a suspended ceiling and just left to get on with it.
Lovely easy well prepared work, just like 600x300 stone on bumpy painted plaster in someone's bathroom!! :mad2:

That is the good thing about working for a decent main contractor, they wont ask you to proceed if its no good. try telling Mrs smith her bathroom wont be available for another week because the plaster is still wet! :smart:
 
When I used to subby for *.**.. Specialist contractors, we used to be Based in Suffolk but working central London 1 week, Cornwall the next, south Wales, Kent, Surrey ......... you name it all south of Nottingham. Love it!!
 
When I used to subby for *.**.. Specialist contractors, we used to be Based in Suffolk but working central London 1 week, Cornwall the next, south Wales, Kent, Surrey ......... you name it all south of Nottingham. Love it!!

We currently have projects in;
Coventry
Winchester
Croydon
Rushden
Birmingham
Cheltenham
Wolverhampton
Derby

So we get about, better than working in one place all the time :auto:
 
We currently have projects in;
Coventry
Winchester
Croydon
Rushden
Birmingham
Cheltenham
Wolverhampton
Derby

So we get about, better than working in one place all the time :auto:


:iagree: , its all good fun :smilewinkgrin:
 
B

bugs183

Commercial work requires a differant attitude to domestic.

Firstly don't think that you will be working as soon as you arrive, often you need to get inducted onto the site, this always takes longer than expected. Then you need to get to where you are working, see whos' working there, get a feel for the chaps and get them on side so that everyone can do their job. I've stood around for hours on end way into the small hours waiting for someone to finish a job, or get someone to switch alarms off etc. Not to mention all the working at height cages, access problems with health and safety Hitlers!
Now in a domestic you turn up and all being well you get stuck in...

So you price the job that needs to be done, but you also have to price with you're gaffer/site agent any contingency payments. If you've talked about delays, induction mornings then you've covered yourself, the guy paying knows what you will charge in case of delays etc. Some guys get contracts drawn up if they are running the job.

So hopefully if you've manned up from the beginning and expressed your terms then all going well the job is rewarding and makes a very pleasant change from grovelling in someones bathroom!
 
'Safety hitlers' :lol: I like that.

one lad I used to work with never liked doing floors with steelies on but always got told! HaHaaaa

All us boys used to let be known of health & safety officer was on site or contracts firm bosses were about as we all used to rush to get the high Vis's back on ! :lol:
 
Im on a commercial at the mo, toilet blocks, i was polishing up today and set the fire alarms off, emptied the place, about 100 staff out front ,with me walking around them whistling to shaggys old song
"It wasn't me"


:lol:
 

Reply to Commercial or domestic in the Canada Tile Advice area at TilersForums.com

Subscribe to Tilers Forums

There are similar tiling threads here

    • Like
Wall & Floor Tiler Queensland Australia Tile Right About the role Seeking a Wall & Floor Tiler...
Replies
2
Views
1K
Plazma cutter causing SPD failure?? Discussion ThreadPlazma cutter causing SPD failure...
Replies
0
Views
371

Advertisement

Thread Information

Title
Commercial or domestic
Prefix
N/A
Forum
Canada Tile Advice
Start date
Last reply date
Replies
51

Which tile adhesive brand did you use most this year?

  • Palace

    Votes: 5 4.5%
  • Kerakoll

    Votes: 8 7.1%
  • Ardex

    Votes: 7 6.3%
  • Mapei

    Votes: 32 28.6%
  • Ultra Tile

    Votes: 14 12.5%
  • BAL

    Votes: 29 25.9%
  • Wedi

    Votes: 3 2.7%
  • Benfer

    Votes: 2 1.8%
  • Tilemaster

    Votes: 19 17.0%
  • Weber

    Votes: 18 16.1%
  • Other (any other brand not listed)

    Votes: 13 11.6%
  • Nicobond

    Votes: 5 4.5%
  • Norcros

    Votes: 3 2.7%
  • Kelmore

    Votes: 2 1.8%
Top