Connect retic controller to Dol contractor Discussion ThreadConnect retic controller to Dol contractor Electrical Advice
Hi, after some advice as my retired electrician father in law can’t figure it out.
We purchased a house with a bore, I have attached the current setup in a picture. The dol contractor is always on so we have to use the isolator switch to turn off and on (he said saomething about the isolator being broken as when turned off there is still one phase that is live on the pump. That’s the first issue.
How would I go about getting him to connect a retic controller to the bore pump. He said it’s hard to do because the floatless level switch
Any help would be appreciated.
![[ElectriciansForums.net] Connect retic controller to Dol contractor](https://electricians.s3.eu-west-1.amazonaws.com/data/attachments/78/78504-c6a45fc4073ca6d2db99dafb945c58ce.jpg "[ElectriciansForums.net] Connect retic controller to Dol contractor")
Connect retic controller to Dol contractor for the original thread on Electricians Forums
Hi, after some advice as my retired electrician father in law can’t figure it out.
We purchased a house with a bore, I have attached the current setup in a picture. The dol contractor is always on so we have to use the isolator switch to turn off and on (he said saomething about the isolator being broken as when turned off there is still one phase that is live on the pump. That’s the first issue.
How would I go about getting him to connect a retic controller to the bore pump. He said it’s hard to do because the floatless level switch
Any help would be appreciated.
Connect retic controller to Dol contractor for the original thread on Electricians Forums
