Cost effective tile cutter for 600x300 pocelain floor tile cutter

Tilers Forums Official Sponsors

If it's a one off job, and you have a grinder or can borrow one, get a decent blade for about 20 quid and Bob's your uncle..!
 
If it's a one off job, and you have a grinder or can borrow one, get a decent blade for about 20 quid and Bob's your uncle..!

Thanks for that Andy,

I did try a small angle grinder with a 110mm marcrist diamond blade but it was a terrable cut.

Can you please recommend one i can give a try.
 
Last edited:
Turbo X Diamond Porcelain Blade
Home / Cutting / Turbo X Diamond Porcelain Blade
BC_8270_ptA-1-800x300.jpg


Turbo X designed Diamond Blade for angle grinders particularly for cutting hard material such as porcelain, hard ceramics and quartz. Only 1.2mm thick and with a 10mm high segment giving fast clean cutting and a long life. Available in 115mm and 125mm.
From: £11.55 +VAT

From: £11.55+VAT


These are good blades from ATS diamond tools..

(Ignore this first link, my mistake)...🙂
 
Thanks Andy that looks just the job.

I have an old Ishii Big Clinker and to be honest it does the job. It looks like the Big clinker 2 from screwfix.

I will have a try with that and the angle grinder and see how I get on.

Thanks again

Col
 

Advertisement

Thread Information

Title
Cost effective tile cutter for 600x300 pocelain floor tile cutter
Prefix
N/A
Forum
Tile Cutters (Manual & Wet Cutters)
Start date
Last reply date
Replies
9

Advertisement

UK Tiling Forum

Thread statistics

Created
Colo,
Last reply from
Colo,
Replies
9
Views
4,061

Thread statistics

Created
Colo,
Last reply from
Colo,
Replies
9
Views
4,061

Weekly Email Digest

Back