Discuss Ditra On Water Pipe Underfloor Heating in the Canada Tile Advice area at TilersForums.com.

L

LM

The 70 meter area consists of 40 meter kitchen 20 meter utility room and 10 meter downstairs shower room do u still think I need a expansion joint ?
Kyle just be carefull, the size of the bay's regarding expansion are an approximate guide on standard screeds, your job is pushing it to the extremes, under floor heating with ply on top is stretching it. Considerations have to be made regarding the shape of the bay's ie: 8x5 or 2x20, these factors would make a massive difference as to where expansion joints should be placed, also factors like the colour and composition of the tile in relation to how exposed they will be to sunlight on a substrate like that should not be ignored as these factors will determine the extremities the tile will face. I'm just trying to make you aware of the things that will more than likely cause a failure on a floor like this unless properly planned for.
 
S

SJPurdy

use a adhesive suitable for the substrate
And for the tile!

The tiles here are 600 x 600mm porcelain so the adhesive must be able to bond to 600 x 600mm porcelain; as well as the substrate. A no flex adhesive will not bond sufficiently to porcelain and many of the slightly modified adhesives are only recommended for smaller size porcelain tiles.
 
S

SJPurdy

you us an adhesive suitable for ditra to substrate and can be a different one for tiles to ditra
Sorry i'd skipped over a few posts and thought thread was still about addy on top of Ditra
Yes to stick Ditra to its substrate use adhesive suitable for the substrate. I always overspec. on the sticky side so I have confidence in the bond to the fleece on the underside of the Ditra.
 

Reply to Ditra On Water Pipe Underfloor Heating in the Canada Tile Advice area at TilersForums.com

Subscribe to Tilers Forums

There are similar tiling threads here

    • Like
Hello, I did some reading here and there, but the opinions seem to diverge at some point and I...
Replies
2
Views
1K
We had a water underfloor heating installed and tiled over. 3 months later we noticed many tiles...
Replies
7
Views
3K
Amethsyt
A
    • Like
Hi guys. Im a carpenter who has tiled a fair few floors over the years as i fit a lot of...
Replies
13
Views
2K
Hi I asked the Wunda technical department if I can just use a Ditra mat only and not the SLC...
Replies
12
Views
2K
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
Replies
1
Views
2K

Advertisement

Thread starter

Kyle Knowles

Esteemed
Arms
TF
Joined
Location
Widnes
Business Name
Kyle Knowles Tiling

Thread Information

Title
Ditra On Water Pipe Underfloor Heating
Prefix
N/A
Forum
Canada Tile Advice
Start date
Last reply date
Replies
43

Which tile adhesive brand did you use most this year?

  • Palace

    Votes: 9 6.2%
  • Kerakoll

    Votes: 13 8.9%
  • Ardex

    Votes: 11 7.5%
  • Mapei

    Votes: 44 30.1%
  • Ultra Tile

    Votes: 17 11.6%
  • BAL

    Votes: 34 23.3%
  • Wedi

    Votes: 3 2.1%
  • Benfer

    Votes: 2 1.4%
  • Tilemaster

    Votes: 20 13.7%
  • Weber

    Votes: 18 12.3%
  • Other (any other brand not listed)

    Votes: 15 10.3%
  • Nicobond

    Votes: 7 4.8%
  • Norcros

    Votes: 3 2.1%
  • Kelmore

    Votes: 4 2.7%

Birthdays

Top