dry cutter

[grumpygrouter]

Hi Grumps Just noted that you said the replacement cutting wheel for the 24 is the same as for the Master Piuma and infact is the smaller wheel for the Mini Piuma which is the same as the replacement for the 24. Only know as I ordered the wrong one last time.

Hi mate, sorry if I was wrong, I extracted the info from the Kwicksplit site.

grumpy

 

[brian c]

well folks i ended up getting the small pocket rubi for the small jobs cost 25quid and bought it from BUYBRAND TOOLS,thanks Neil for the speedy sevice.Will let you know how i get on with it in the next week or so.

 

[tilinga2z]

Hope the pocket Rubi works out great for you, as Grumpy said though the 24 is a cracking little worktop cutter which takes up no space at all. One small flaw is that it marks the tile with its breaker very slightly although this is easily overcome by placing a piece of tape on the right arm.

 

[grumpygrouter]

Hope the pocket Rubi works out great for you, as Grumpy said though the 24 is a cracking little worktop cutter which takes up no space at all. One small flaw is that it marks the tile with its breaker very slightly although this is easily overcome by placing a piece of tape on the right arm.

Just done a sample cut on mine mate, no marks at all left on my tile. Is the surface of the break point scratched on yours?

Grumpy

 

[tilinga2z]

No but one side is angled slightly lower than the other, Beano at PTS told us that it was a common problem and to use the tape, maybe your 24 is angled slightly less than mine. N.B. the mark normally only shows on lighter tiles. One technique of course is to make sure the mark is on the off-cut.