egg box wall???

[poynton phil]

The customers new bath on the job i'v started today, is a bit wider than the room, so its been recessed into the wall. The plasterer left the recess in a right mess, he used three diferent pieces of 10mm plasterboard on the shower wall, an area of 800x1800, Only attatched down the sides, with roofing felt nails, i'v stripped that replaced it with backer board securley. The small return was damp in 4 places going up the wall and the plaster board only was attached in these places with 4 big dollops of bonding plaster. Inside the wall looks like a egg box. What would be the best way of repairing this small return ready for tiles. :huh2: Any advice will be apprieciated.

 

[Mark B]

Hi Phil,

I came accross something similar on my last job. I ended up completely removing the inner skin of plasterboard, cutting out some of the egg box, fixing internal stud framework and re-boarding with Aquapanel and plasterboard. Not an easy job as it was most of the walls in the bathroom but it did mean that I had perfect walls for tiling on to.

Mark.

 

[wetdec]

Its called Paramount partitioning m8, get yourself some multi coat plaster and patch it back or remove and replace. Its no problem the egg box as you call it is a very strong panel


tiler

,,

 

[poynton phil]

Thanks for the advice guys, i'v not been there today, but my plasterer has been round and sorted it for me, and it can be tiled tomorrow