D
dilz000
well guys, seeing as you've all been so helpfull i thought you would also like to see some progress!!
This is what was under the carpet and lino, it goes all the way through the house! took a full days work to get it up. Cleaned as much of the bitumen off as I could. Also had the toilet and sink taken out and took off all of the existing skirting boards.
I then primed the substrate and started installing the 6mm instillation boards from Uheat. I tried to lay them in such a way that there are as little joins as possible in the heavily trafficked areas. I ordered enough adhesive to lay this and the tiles, however I realise now I should have ordered gray to do this as the white adhesive is more expensive. :mad2:
Today is the day for UFH instillation. I also get to play with my new Fien Multimaster soon to nip off the bottom of the architraves.
Any criticism & comments welcome.
This is what was under the carpet and lino, it goes all the way through the house! took a full days work to get it up. Cleaned as much of the bitumen off as I could. Also had the toilet and sink taken out and took off all of the existing skirting boards.
I then primed the substrate and started installing the 6mm instillation boards from Uheat. I tried to lay them in such a way that there are as little joins as possible in the heavily trafficked areas. I ordered enough adhesive to lay this and the tiles, however I realise now I should have ordered gray to do this as the white adhesive is more expensive. :mad2:
Today is the day for UFH instillation. I also get to play with my new Fien Multimaster soon to nip off the bottom of the architraves.
Any criticism & comments welcome.