floor screed problem

[heavytrevy]

Scabbling is roughing or scratching the surface.

Trev

Mark, Trev In the British and Aussie vernacular, what is "Scabble"?

 

[Diamond Pool Finishers]

Rob z it's the sort of thing we have to do to a swimming pool shell that has been cast from shuttered concrete and the inner surface is to smooth to for renda to successfully take or key into!! and can be a violent operation

 

[White Room]

And I wonder what the maximum time your supposed to be using one with that vibration:wacky:

 

[Rob Z]

Scabble then sounds like what we call "bush hammering".

 

[Diamond Pool Finishers]

Scabble then sounds like what we call "bush hammering".

that's the one mate!! a mild-form are diamond bushes on a shaft ,and you rattle on hammer against the surface to be scabbled ,and it should take paint/Addy off the surface, the one's we use are on a compressor and it's like a scaffolding pole, a serious bit of kit :lol: but for some stuff i prefer to sand-blast

 

[jay]

]

that's the one mate!! a mild-form are diamond bushes on a shaft ,and you rattle on hammer against the surface to be scabbled ,and it should take paint/Addy off the surface, the one's we use are on a compressor and it's like a scaffolding pole, a serious bit of kit :lol: but for some stuff i prefer to sand-blast

sounds like a needle gun View attachment 9127

 

[Richard Edwards]

that's the one mate!! a mild-form are diamond bushes on a shaft ,and you rattle on hammer against the surface to be scabbled ,and it should take paint/Addy off the surface, the one's we use are on a compressor and it's like a scaffolding pole, a serious bit of kit :lol: but for some stuff i prefer to sand-blast

Hi Gooner - Glad to read between the lines that your busier again . On the subject of sand blasting - Can you do this now - even with serious air fed helments, I was under the impression that HSFE had effectively baned this method in favor of J-Blast due to silicoisis or something similar - Do you still use this method - either dry or wet ?

 

[Diamond Pool Finishers]

Hi Gooner - Glad to read between the lines that your busier again . On the subject of sand blasting - Can you do this now - even with serious air fed helments, I was under the impression that HSFE had effectively baned this method in favor of J-Blast due to silicoisis or something similar - Do you still use this method - either dry or wet ?

thank's mate , we did one about eighteen month's ago, so unless they the HSFE have banned it ( which would not surprize me :yikes: )then we still offer this service !!:lol:

 

[Rob Z]

Rob z it's the sort of thing we have to do to a swimming pool shell that has been cast from shuttered concrete and the inner surface is to smooth to for renda to successfully take or key into!! and can be a violent operation

Dave, is "shuttered concrete" the same as "Gunite"?

 

[jay]

gooner ever used a dash coat or splash coat :8: