C
Christine
My tiles are moving after 3 days of been layed on Cement floor. I used MapeGrip D2. just seen a date on the side 9/06/23 what does that mean? I did put the tiles on the same floor about 10+ years ago with ease
Floor tiles have been installed / fixed using tubbed adhesive
Tilers Forums Official Sponsors
D2 is a Dispersion adhesive and not suitable for floor tiling.
Ooooo unlucky. You found us after you did that!.
Get them up scrape it all off the floor and the tile. Bin that.
Then use a cement based adhesive and mix it in a bucket. You can get 24hr setting ones to give you some extra bucket time.
And your tiles are already cut.
So you were nearly spot on.
Don't suppose it was a shop that let you walk out with floor tiles and wall tile adhesive?
Get them up scrape it all off the floor and the tile. Bin that.
Then use a cement based adhesive and mix it in a bucket. You can get 24hr setting ones to give you some extra bucket time.
And your tiles are already cut.
So you were nearly spot on.
Don't suppose it was a shop that let you walk out with floor tiles and wall tile adhesive?
Last edited:
There are similar tiling threads here
