Floor with thick layer of adhesive

[nakhodka2002]

Hello all. Hope all ok.
Last Friday I went to look on job. And it is a 10 mm limestone 30 sq m on a concret . The problem is part of the floor been done by customer (woman) not this 30 sq m And when she did the floor she did not realised that floor was not in level and end up with 10-15 mm of adhesive. Now she does not want a step between tiles and wants me to carry on with the same level. I told her it will be expensive to fix tiles on the same level because of the thick bed of adhesive. What shall I do? I did not give my quote yet. Plan was to give day rate for preparation of the floor , price per sq m to fix the stone and separate bill for materials. Or should I just walk away? And customer does not want to rip the floor she did even though it badly fixed

thanks for your advise

 

[Andy Allen]

did she dot dab the tiles..?

if not why don't you put some slc down to level the floor..

 

[Sean SML Tiling]

Same as andy.

 

[Gazzer]

Either way there will be a cost but SLC is the best way.

 

[andyb1]

As above SLC, got to be a better way.

 

[AliGage]

Agreed. About 15 bags should do it then use a thick bed towel to fix the stone.

 

[nakhodka2002]

Thanks everyone for your advice

 

[CJ]

Also.......take pictures go wot SHE has done, just in case of problems, and your covered on wot U have done.