Fugi Kit for Silicon and tiles.

[GrumpyGrampa]

I have tiled down a wall to a kitchen worktop and want to Silicon the join where the cut tile meets the worktop surface. I laid a bead of Silicon and used a Fugi Kit with the "bridge" but still get indentations at the grout join between tiles. Any suggestions would be appreciated.

 

[Bond]

Perhaps use a lighter touch when pulling the fugi tool, wet finger to finish the job.

 

[GrumpyGrampa]

Thank you for taking the time to reply, I'll try that

 

[jdnest]

Agreed, just a lighter touch to get the profile and excess Silicon off.

Then you can use a watered down solution of washing up liquid as a spray or on your finger to smooth it out afterwards.