granfix wall grout 10kg bags (danger)

[Time's Ran Out]

Read the 10 kg bags of granfix then get back to me

Now it's your turn!
If you'd like to provide the information on the product you've used then I'am sure you'll get some constructive feedback.
What was the exact name of the granfix grout you used?
How long had it been in the tile joints before the walls were subject to wetting?
Has there been any movement in the substrate?
Thanks.

 

[Burnsy]

How can anything that is mixed with water be waterproof?

 

[jay]

How can anything that is mixed with water be waterproof?

you may want to re think that answer

 

[Burnsy]

you may want to re think that answer

It wasnt an answer, it was a question :lol:

Enlighten me as Im not sure

 

[jay]

lots of products these days use water as a base for water proofing

sorry mis read your question


www.conpro.com.au/products/...waterproofing.../hydrepoxy/ -


www.morganadhesives.com.au/.../waterproof%20membrane%20a4.pdf - Similar

 

[Burnsy]

lots of products these days use water as a base for water proofing

sorry mis read your question

Well you learn something new every day!

Have you got any examples?

Do you mean neat water mixed with something can waterproof or water as part of the liquid base that that helps waterproofing?

I was talking about grout mixed with clean water only

 

[jay]

www.constructionchemicals.com.au/PDF/Kemcrete.pdf - Similar

there are heapes silasec have good products to:8:

 

[doug boardley]

It wasnt an answer, it was a question :lol:

Enlighten me as Im not sure

because when water is mixed with cement, the whole chemical composition changes. Imagine mixing your addy with your whisk rotating clockwise, if you then mix it counter clockwise it doesn't revert back to water and powder does it:smilewinkgrin:

 

[Scott]

Ok i read the data sheet. Your turn, what adhesive did you use and what tiles were they, ceramic/porcelain etc?

 

[stevee]

i use granfix grout regular,the white is a nice clean bright white ,and its sys on the bag for swimming pools, this gives the chance of a photo opportunity:lol::lol:

granfix grout

 

[DHTiling]

Nice feature stevee.

 

[The Legend; Phil Hobson RIP]

Different that Stevee, nice work

 

[White Room]

Nice one stevee

 

[aph257]

verticle brick bond, different

 

[Fred]

Used Granfix grout on 40 m3 trav a few months back, didn't really like the way it formed but no problems, told the builder I would supply Mapei in the future.

 

[ozboz]

Gotta say I'm not keen on granfix, Mapei Man now, Top products and top tech help and back up. I refused to use granfix grout on a granite job last year, the shopfitters director copped a serve from the supplier who phoned granfix, some one at granfix informed us that 90% of the trade uses granfix ?!! I began to wonder what the other 10% uses !! Anyway I got my own way, they came up with norcross light grey flexible, gotta say it was xlnt! real easy to spread and wash off ,3mm joints 15 mm thick exfoliated black granite, about 200m2 in all Sorted !

 

[paul flight]

you must use waterprof adhesive in wet areas and have 100% cover to back of tiles ! the tiles would not come off if fix with correct materials this may be you problem??

 

[vpproddy]

I used granfix superfix adhesive the tiles were ceramic.these few call backs are the first ones I've had in 17 years.when I phoned granfix tech dept they told me the 10kg bags of grout are not sutible for showers and said the grout is only splashproof

 

[Mike]

This is the first post by this member and at least 3 of the replies have contained comments bordering on churlish and 1 removed by administration.
I'am sure even a regular contributor would find the tone unacceptable and wonder what's the point of posting.
If you haven't got anything constructive/helpful/amusing to add why bother.
This is my opinion of this threads content.

I was taught that no grout was waterproof just water resistent, hence the requirement of tanking shower areas. if the grout fails and water gets behind the tile then the tiles are likely to fall off due to possible substrate damage or tubbed addy breaking down due to the addy getting soaked. I always use granfix with no problems but i always tank the walls. only takes half an hour with a roller!

 

[Richard Edwards]

Hello

I've read all the posts on this subject and all through, almost to the end, some members have been asking for further info on preparation, adhesive, grout and installation method used. - Clearly either, you have not done something correctly in the prep, or used in appropriate products for the application, or maybe the product failed due to manufacturing, storage or specification.

Good folks like John and others have all tried to help and asked a variety of questions, aimed at trying to understand what has gone wrong. Mostly its because they want to help and partially its because some of us use Granfix products from time to time - [as we do] and we try to gather as much info as we can to avoid similar issues.

I do not use the adhesive that you have used, however it is probably a premixed water disperstion gypsum based addy. Could you please supply some more info on the application / prep / substrate etc

1 What substrate did you tile on to. was it sound etc - type ? ?
2 Was the shower wet area tanked and if so what with ?
3 Are my assumptions re the addy correct - If not please correct ?
4 What was the time scale / weather-humidity etc between tiling and Grouting ?

One thing for certain, pre-mixed addy is not waterproof or suitable for showers / wet areas - Only use cement based product.

Tanking is critical - no tanking - no waterproofing

And finally - All grout [except Epoxy] will let water through - although adding polymers and SBR etc will stop some water ingress, and if you have used water dispersion type addy, then after a short time, if water leaks through the grouting, the adhesive will revert back to a soggy dough - ie similar to the state it was it the tub, and heh-presto your tiles fall off.

Hope you will be able to help us with some more info Mr VP Proddy - We look forward to your reply post etc

Thank you

 

[mikethetile]

I think you mean supergrip as granfix dont name any of their products superfix

this is totally unsuitable which is why its failing

please accept critiscm and allow us to advise you, its to your benefit

theres nothing wrong with granfix products if the correct product is used in the correct situation

 

[Scott]

Supergrip is a dispersion adhesive and only suitable for tiles up to 300 x300mm. Any water ingress and they will come off im afraid.

Data sheet:
http://www.tileadhesive.co.uk/PDF files/Supergrip Adhesive.pdf

Disturbingly it says prime with Granifx PVA bonding and primer, dunno whats in that though:yikes:

 

[DHTiling]

you must use waterprof adhesive in wet areas and have 100% cover to back of tiles ! the tiles would not come off if fix with correct materials this may be you problem??

Can you clarify your definition of water proof adhesive please..

 

[Dave Ramsden]

:welcome: and thanks for the info!

 

[Dan]

Just bumping some of the older popular (sometimes not so popular) threads. Probably wont be current discussion these days but I just need to do it. So just ignore the thread if it's not current for you.