Saw Marcs setup Daughter said the vacuum was taller than her. Sure he could elaborate 3_fall
B
Bill
Saw Marks are my worst nightmare.
W
WetSaw
Wet sponge!
O
Old Mod
O
Old Mod
Yeah.....I could Simon. 😀
O
One Day
excessive grinder use was the reason I bought a raimondi gs86.
O
Old Mod
How you getting on with it Mark?
O
One Day
Using it a lot now Marc. Easy to transport and set up. Cuts every bit as well as my grinders and I get to stay inside and dust free.
Limitation is obviously the size.
Just a very very good little saw and after years of using grinders I had forgotten all about small wet saws!
O
Old Mod
Kool! Glad it’s working out.
Always a gamble when you invest a lot of money as to whether it’ll fill your expectations or not.
I was uneasy when I bought my vacuum/dust extractor, but it’s excellent, well worth the investment.
Always a gamble when you invest a lot of money as to whether it’ll fill your expectations or not.
I was uneasy when I bought my vacuum/dust extractor, but it’s excellent, well worth the investment.
Bought a Raimondi eco many many years ago even cut 600 600 marble lovely little machine.
O
Old Mod
O
One Day
You don't do things by halves do you Marc?!
What van are you driving?
One of these? (with a trailer of course)
What van are you driving?
One of these? (with a trailer of course)
O
Old Mod
You don't do things by halves do you Marc?!
What van are you driving?
One of these? (with a trailer of course)
Haha close Mark!
B
Blunt Tool
W
WetSaw
As if he'd drive a "van"!
O
Old Mod
Well I did ask if you still wanted a link. 😛
Have one of those in the shed. It does glide but not a patch on the dyson
Saphiretiler
TF
How do you attach that to your grinder?
O
Old Mod
It depends on the task I’m carrying out tbh.
There are a multitude of dust cowls out there for different uses.
But I also have it for floor grinding, and with a ‘Y’ connector you can run two angle grinders at once.
B
Blunt Tool
Marc @3_fall did share a link for a bargain M class extractor
V-TUF BUDDY110 110v DustBuddy Dust Extractor M-Class 800w | eBay - https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F391901759823
The point is that you still have it after 50 years, I very much doubt that your Dyson will last 50 months.
We had one too at home (hover) and I inherited it for DIY work until I destroyed it with brick dust, one of the issues with it was that it kicked out air under it - blowing everything around before you got to it.
I now use one of these Titan TTB430VAC 1400W 30Ltr Wet & Dry Vacuum Cleaner 240V | Wet & Dry Vacuums | Screwfix.com - https://www.screwfix.com/p/titan-ttb430vac-1400w-30ltr-wet-dry-vacuum-cleaner-240v/70472 and that also blows as hard as it sucks with the same problem of chucking laying dust around so for inside work I connect an extra length of 32mm hose and route that out the window. Another good feature is the power take off that turns the hover on when you pull the tool trigger, and standard 32mm fittings
There are similar tiling threads here
- Sticky
Featured Threads
- F
- W
-
- I
-
-
-
-
