Discuss grouting vitrified in the Australia Tiling Forum area at TilersForums.com.

I

Ian

Some porcelains I've been leaving and hour, sometimes more to let the grout really set up. With grout 3000, if you really hold your nerve, you can get really full joints, it goes off quite slowly so there's no real problem when it comes to washing off. I did a 60m floor a couple of weeks ago, grouted the whole lot, left it for an hour or so then started to wash off, the first area had probably had 90 mins setting up time before I started to wash it off.
 

Andy Allen

TF
Esteemed
Arms
18,290
1,318
Gloucester
Some porcelains I've been leaving and hour, sometimes more to let the grout really set up. With grout 3000, if you really hold your nerve, you can get really full joints, it goes off quite slowly so there's no real problem when it comes to washing off. I did a 60m floor a couple of weeks ago, grouted the whole lot, left it for an hour or so then started to wash off, the first area had probably had 90 mins setting up time before I started to wash it off.

You wouldn't leave bal super flex on for that long would you?
 

Reply to grouting vitrified in the Australia Tiling Forum area at TilersForums.com

Subscribe to Tilers Forums

There are similar tiling threads here

Hi, Just wondering what the general consensus is with grout for a shower. I have epoxy grouted...
Replies
0
Views
808
Hi, I've laid an external porcelain patio on a sand and cement bed with ultrascape priming...
Replies
3
Views
435
    • Like
Hello, I did some reading here and there, but the opinions seem to diverge at some point and I...
Replies
2
Views
1K
    • Like
Hello, after tiling the kitchen area I did grouting but I am not happy with the results. The...
Replies
10
Views
864
Hi I’ve tiled my bathroom floor on top of hardie cement board. I have left expansion gaps all...
Replies
10
Views
2K

Advertisement

Thread starter

Joined
Location
Nottingham

Thread Information

Title
grouting vitrified
Prefix
N/A
Forum
Australia Tiling Forum
Start date
Last reply date
Replies
9

Which tile adhesive brand did you use most this year?

  • Palace

    Votes: 9 6.1%
  • Kerakoll

    Votes: 14 9.5%
  • Ardex

    Votes: 11 7.4%
  • Mapei

    Votes: 44 29.7%
  • Ultra Tile

    Votes: 17 11.5%
  • BAL

    Votes: 35 23.6%
  • Wedi

    Votes: 3 2.0%
  • Benfer

    Votes: 2 1.4%
  • Tilemaster

    Votes: 21 14.2%
  • Weber

    Votes: 18 12.2%
  • Other (any other brand not listed)

    Votes: 15 10.1%
  • Nicobond

    Votes: 7 4.7%
  • Norcros

    Votes: 3 2.0%
  • Kelmore

    Votes: 4 2.7%
Top