HG Impreganator Removal

[clipboard2008]

Hi All

Just completed a White Limestone job using HG Impregnator. Customer purchased the Limestone before employing me and doesn't know what Limestone it is. It is Honed and Filled.

The impregnator was left to dry for more than 5 mins which is a mistake I now realise.

How is the best way to remove as much of this impregnator so I can reseal the tiles?

If I reseal I should use the HG again shouldn't I?

Thanks

 

[DHTiling]

You could try some more sealer and let it sit for few mins, sometimes doing this can activate the residue and then it just buffs off ... But if not then use a cleaner suitable for limestone and then do a water test to determine water porosity of the stone and then re-seal till saturated whilst buffing in between coats.

Would be better if we knew what limestone it is as some cleaners are unsuitable for certain limestones.