Discuss How Do I Break Down Keraquick in the Tile Adhesive and Grout Advice area at TilersForums.com.

S

Stef

been thinking about this thread all day.... simply put... i have never seen a tile lift from a well installed, primed section of plywood with a decent adhesive and a well laid tile. as i said, the bastard is in the number of screws you need to go through to make the ply overboard totally inflexible... and in response to aussie tiler.... you are effectively creating a cross ply section with overboarding which makes it vastly stronger. like anything, if it is done well it will last.
If it's done well it will last but not using 6mm ply.
Honestly you need to move with the times & get away from fixing to ply, it's just not stable a surface to tile to these days.
Hardie or thermal will give u a far superior bond & wont suffer from the same expansion or contraction that you get through ply.
 
L

LM

If it's done well it will last but not using 6mm ply.
Honestly you need to move with the times & get away from fixing to ply, it's just not stable a surface to tile to these days.
Hardie or thermal will give u a far superior bond & wont suffer from the same expansion or contraction that you get through ply.
Couldn't agree more, but sometimes some people just have to learn the hard way;)
Today's ply simply isn't what it used to be!
 
J

Joseph Kover

If 19 came off badly layed, the other will come most likely off too. Take all off and redone. You can start grindering the floor, you risk your floor heating and make all dust for yourself, if you still insist to lay back the 19 pcs, grinder from the back of the tiles which will be pain in the back site but you can gain another 1-2 mm to work with so you need to take less thickness out of the Adhesive on the floor plus you can do the grindering outside. If you laid back the 19 tiles and other 15 comes off 3 months later repeat the procedure. But honestly, better to take all off
 

Reply to How Do I Break Down Keraquick in the Tile Adhesive and Grout Advice area at TilersForums.com

Subscribe to Tilers Forums

There are similar tiling threads here

This is my first time posting, I searched for a similar thread and didn't find much- apologies...
Replies
3
Views
3K
    • Like
https://www.tilersforums.com/threads/shower-bath-tiling-preparation-plaster-and-wooden-windowsill...
Replies
1
Views
1K
Hello, Just joined the forum and am hoping to get some advice on a project. I live in San...
Replies
2
Views
4K
Does anyone have a DIY link or suggestions for removing just a single central tile from a...
Replies
6
Views
2K
We decided to replace the mosaic floor tiles in our wet room (2m x 2m). I've removed the tiles...
Replies
3
Views
4K

Tile Adhesive Trending Topics

Advertisement

Thread Information

Title
How Do I Break Down Keraquick
Prefix
N/A
Forum
Tile Adhesive and Grout Advice
Start date
Last reply date
Replies
64

Which tile adhesive brand did you use most this year?

  • Palace

    Votes: 9 5.8%
  • Kerakoll

    Votes: 15 9.6%
  • Ardex

    Votes: 11 7.1%
  • Mapei

    Votes: 46 29.5%
  • Ultra Tile

    Votes: 19 12.2%
  • BAL

    Votes: 37 23.7%
  • Wedi

    Votes: 4 2.6%
  • Benfer

    Votes: 2 1.3%
  • Tilemaster

    Votes: 21 13.5%
  • Weber

    Votes: 18 11.5%
  • Other (any other brand not listed)

    Votes: 17 10.9%
  • Nicobond

    Votes: 7 4.5%
  • Norcros

    Votes: 3 1.9%
  • Kelmore

    Votes: 4 2.6%

Birthdays

Top