How do I drill a SQUARE hole into tile to install an electrical socket

[Deleted member 1779]

Re: How do I drill a SQUARE hole into tile to install an electrical so

I did see that Youtube.

And yes Oli yes I think maybe thats the one Doug meant.

However.... A word of caution!

The bit can ONLY be used with soft wet tiles:

===================================================================================
This is thier website warning:

PLEASE NOTE: Suited for working all tiles which are able to absorb water for cooling.

Hard material such as stoneware* , marble or granite can not be worked. (*Porcelain tiles)

===================================================================================

(Our comments are in red)

 

[stephenoneill]

Re: How do I drill a SQUARE hole into tile to install an electrical so

USING YOUR RUBI:smilewinkgrin: SCORE THE SQUARE FIRST THEN CUT FROM BEHIND AND TAP OUT THE BITS .THIS WAY THE CUT ON THE SURFACE IS VERY CLEAN AND PROFFESSIONAL LOOKING AS OPPOSED TO USING THE GRINDER.

 

[Gazzer]

Re: How do I drill a SQUARE hole into tile to install an electrical so

Why shout ? Turn the Caps off .

 

[stephenoneill]

Re: How do I drill a SQUARE hole into tile to install an electrical so

Why shout ? Turn the Caps off .

:yikes: sorry im not very good with computers

 

[widler]

Re: How do I drill a SQUARE hole into tile to install an electrical so

why anyone would waste the life time of a expensive drillbit drilling 4 holes in a tile when you can do it twice as quick with a grinder is just god dam madness,the man should be in a institute tied to a chair with a ski mask over his face,cccrrraaaazzyyyyyyyy

 

[Spud]

Re: How do I drill a SQUARE hole into tile to install an electrical so

in the picture of the light fitting the tiles has obviously been cut out after the tiling had been finished and butchered by who ever tried to fit the light , where it comes on the joint line it is an easy cut with the grinder out of 3 seperate tiles, I do agree with core drilling corners for certain porcelain as it hepls release tension in the tile and can help avoiding stress cracks from the L cut but in this photo the tiler was not to blame for the poor cutting

 

[Dougs Third Go]

Re: How do I drill a SQUARE hole into tile to install an electrical so

Like this Doug....

[video=youtube;Ia6nrt5Xk3g]http://www.youtube.com/watch?v=Ia6nrt5Xk3g[/video]

it wasn't that one Oli, it was one I made myself, I've posted it here on TF before, I'll have another look for it, it did involve drilling two holes though tbh.

 

[widler]

Re: How do I drill a SQUARE hole into tile to install an electrical so

in the picture of the light fitting the tiles has obviously been cut out after the tiling had been finished and butchered by who ever tried to fit the light , where it comes on the joint line it is an easy cut with the grinder out of 3 seperate tiles, I do agree with core drilling corners for certain porcelain as it hepls release tension in the tile and can help avoiding stress cracks from the L cut but in this photo the tiler was not to blame for the poor cutting

just a tech question gary,how does drilling 4 holes in a tile make a difference to to stress in the tile ? wouldnt drilling 4 holes cause more stress in the tile,more vibration causing more stress ?
if ive got the wrong end of the stick i apologize

 

[Dougs Third Go]

Re: How do I drill a SQUARE hole into tile to install an electrical so

http://www.tilersforums.com/tiling-tools/16388-cutting-hole-tile-jigsaw-doug-boardley.html

 

[Spud]

Re: How do I drill a SQUARE hole into tile to install an electrical so

just a tech question gary,how does drilling 4 holes in a tile make a difference to to stress in the tile ? wouldnt drilling 4 holes cause more stress in the tile,more vibration causing more stress ?
if ive got the wrong end of the stick i apologize

Some large format porcelain tiles become highly tensioned when they are produced, cutting a large diameter hole in the tile can release the tension in the tile, the hole size needs to be greater than 30mm in diameter to be big enough to release the tension in the tile ,cutting 4 holes out of the corners in this instance is madness in my opinion and I certainly would never do it on a ceramic tile I would just use a grinder or drop the tile onto a wet saw blade ,we did have a batch of thin porcelain tiles that were impossible to L cut unless we had released the tension in them with a 40mm core drill and after that they could be shaped any way we wanted

 

[d noulton]

Re: How do I drill a SQUARE hole into tile to install an electrical so

why not buy a montolit squadro disc from tradetiler fits on angle grinder only 95mm diameter perfect for socket cut outs used it last year on porcelain no problems

 

[NZ_Tiler]

Re: How do I drill a SQUARE hole into tile to install an electrical so

Silly question, but what shape plug boxes do you have in the UK? Are they all square like this? Here in Austria they are all round flush boxes, so drilling a 63mm hole is much faster then grinder and nippers.

 

[Dan]

Don't mind me while I bump up some of the old threads. I wont be doing this much more. Just the last few in the Tile Drilling forum - How to Drill Porcelain Tiles. Just one of the many tiling advice forums.