How do you

[Diamond Pool Finishers]

Multi traders cut laminate counter tops without chipping the laminate please ? i have got one at home to cut down lengthways and width ways to , i know you can get jigsaw blades that only cut one way but i think this will be crap for the whole length ?

 

[widler]

Circular saw, good blade and cut it from the back .
I think, i aint a multi trader

 

[prceramics]

for a good finish you need a good router buddy , you can do it with a circular saw just turn it over so the good side is down and tape where the saw will exit underneath

 

[Diamond Pool Finishers]

Do you still tape-it , and cut from the back with a router prc ? i have a great dewalt router Big-one......

 

[prceramics]

No router should be good to go if you have a good bit I would do it about 3 to four hits go down about 10mm each time

 

[prceramics]

And always go left to right clamp a guide down using a batton if you havn't got a guide rail

 

[Colour Republic]

Don't mess with it and get a professional multi-trader in.

Tilers, Tile. Multi-Traders, multi-trade:lol:

In what situation are you cutting the length down? are you scribing to the wall? or will the cut edge be visable and you'll edge it after?

 

[lizzardtong]

Use circural saw cut it from the back start from the front of worktop but use descend blade, I use this http://www.toolstation.com/shop/Pow...in+Cutting+184+x+16mm+x+24T/d80/sd3137/p80786 quick and easy.

 

[White Room]

Use circural saw cut it from the back start from the front of worktop but use descend blade, I use this http://www.toolstation.com/shop/Pow...in+Cutting+184+x+16mm+x+24T/d80/sd3137/p80786 quick and easy.

That looks a bit of an animal....

 

[lizzardtong]

That looks a bit of an animal....

thats great blade. quiter than original that came with saw. less friction no burning even in oak wotktops. got 2 1 for rough cuts other for worktops furniture boards etc.

 

[cam_low]

Makita plunge saw

 

[prceramics]

Now you're talking

 

[Diamond Pool Finishers]

She is on about not letting me do it now ! lol as its the last of the counter top for sale , we want two tops about three hundred wide bought one with two round edges down each length .

 

[prceramics]

Compared to tiling mate its easy lol

 

[Perry]

or even a panel saw