How to identify presence of an earth electrode Electrical Advice

Tilers Forums Official Sponsors

How to identify presence of an earth electrode Discussion ThreadHow to identify presence of an earth electrode Electrical Advice

Hello to all you fine folk out there.

I have a question regarding earth electrodes.

I've had two periodic inspections/EICRS recently, where I haven't been able to locate the earth electrode. I am guessing they are installed but have possibly been covered over by new patio extensions and other ground works. The reason I say this is that in both cases, they are small 3 bed houses. I have identified my neutralising links, and there are 3 other 10sq earth cables at the MET at the distribution boards. I know two are doing the bonding of gas and water.
So I'm guessing the other is going to the earth rods.

Is there a way I can test to find out if an earth rod is installed? I remember a guy telling me a while back to disconnect the neutralising link and perform a test across main L, N and E? If result I'd up around 200M ohms then there is an earth rod but I'm not too sure about all this.

Any help I'd really appreciate
Thanks

How to identify presence of an earth electrode for the original thread on Electricians Forums
 

Advertisement

Thread Information

Title
How to identify presence of an earth electrode Electrical Advice
Prefix
N/A
Forum
Electrical Advice
Start date
Last reply date
Replies
0

Advertisement

UK Tiling Forum

Thread statistics

Created
Lou,
Replies
0
Views
89

Thread statistics

Created
Lou,
Replies
0
Views
89

Weekly Email Digest

Back