Hygrometer on Ebay

[Gazzer]

Thanks guys.

What are the correct moisture levels to allow tiling and where is the best place to place the hygrometer.

Thanks again.

I must admit I placce the box somewhere it wont get stood on or kicked but they say to use a protimeter to establish the dampest area of floor and place box there. I have used a simple moisture tester to establish this in the past. Do not place in draughty areas.

As far as I understand, 75% if you are using cement based addy, 85% if using Gysum based adddy. ,,,,,,,I can hear Alan galloping in as I type !

 

[Ajax123]

I must admit I placce the box somewhere it wont get stood on or kicked but they say to use a protimeter to establish the dampest area of floor and place box there. I have used a simple moisture tester to establish this in the past. Do not place in draughty areas.

As far as I understand, 75% if you are using cement based addy, 85% if using Gysum based adddy. ,,,,,,,I can hear Alan galloping in as I type !

again pretty much what would advise. Some gypsum addys say 75%. I think this is important on large format tiles especially. The key.... Read the instructions on the bag.