Tilers Forums Official Sponsors
O
Old Mod
L
LM
With any experience worth talking about in tiling you’ll know when the consistency of your adhesive is right, you don’t have to mix a full bag at once.
W
Waluigi
I do a fraction over 7 litres of water with AK20, does most of the bag. Or at least keeps me busy for a fair few hours. Keep in mind my tiling is mainly walls so I don’t need to use every last scrap of each bag. It’s sometimes nice to have a few bits leftover for tiling a bit of boxing for example.
BTW, nice adhesive.
BTW, nice adhesive.
O
Old Mod
L
LM
So do I but that’s because we’ve buckets that fit our needs 🙄
W
Waluigi
I think you two have done the maths 😀
D
Dumbo
As isomat is new to me im doing full bags with recommended amounts . As this is a double knock product if I relied on what I thought it should be like after the first mix I would be adding more water to it as I would think it was to dry .
O
Old Mod
I tend to add a little extra water tbh.
But you MUST wait at least 10 mins before re mixing, then you’ll get hell of a pot life out of it.
But you MUST wait at least 10 mins before re mixing, then you’ll get hell of a pot life out of it.
