Kitchen Floor Ply Base

[Stef]

A rip snorter. ..lol
Is that actually a tool or something you made up?
Sounds more like a farting pig...lol

Haha, it's what we call a circular saw up here.
A farting pig, David Cameron would be jealous.

 

[terrycoe1]

Well I havnt much to play with I can't put board down due to floor levels of other rooms so I'm open to sudjestions feeling it its very rough not much shine to it either ...could use a ditra membrane ?...

 

[terrycoe1]

As I came to the utility room there's wet glue ...smashing

 

[Stef]

Well I havnt much to play with I can't put board down due to floor levels of other rooms so I'm open to sudjestions feeling it its very rough not much shine to it either ...could use a ditra membrane ?...

Remove any loose bits of bitumen, coat it with a slurry coat, let it dry & tile it.

 

[terrycoe1]

How thick will the slurry coat be ?!

 

[Old Mod]

How thick will the slurry coat be ?!

U can buy ready mixed Terry, TM's Prime & Grip or Mapei's Eco prime to name two, or u can make your own with SBR and tile adhesive.
It has minimal thickness.

 

[terrycoe1]

Going to get a ready mixed then for quickness would u reccomend a slurry on any type of tile for a floor like this !? First I've come across this hurendous stuff ! Once the slurry coats down can you tile direct to it

 

[Stef]

How thick will the slurry coat be ?!

About 1-2mm at most, the exact same as if your using Eco prim grip.

 

[terrycoe1]

Am
I right in thinking this is just a primer but goes on like a ranking kit would !?

 

[terrycoe1]

I have 12mm height to play with so should just about work

 

[Flintstone]

It's a thick primer with grit in and dries like sand paper. Put it on with a roller, sticks like rubbish, tile on it

 

[Stef]

Am
I right in thinking this is just a primer but goes on like a ranking kit would !?

Yeah.

 

[terrycoe1]

Sweet thanks guys

 

[terrycoe1]

Would the bal she be the same stuff

 

[terrycoe1]

Sbr ***