Laitence removal, sanding

[Doozy]

Got a floor sander coming in from a hire company next week to clean up a gyvlon base prior to tiling.

I've never done this myself before, it's always been done by builders etc. The hire company are unsure of exactly what pads/discs to supply with the machine. Anyone got any ideas?

Ta

 

[Flintstone]

How long has the screed been down and what machine is it that you have rented?

 

[Dave Mitchell]

I bought an Errut prm floor grinder with carborundum blocks works a treat !!

 

[thickbed]

Where you based mate, this is something we do a lot of so if you want a quote, please get in touch

Thanks

Mike

 

[Doozy]

Job is in Prestwich, Manchester. Roughly 180sqm.


Screed has been down since March. I thought the builder had sorted the sanding, but apparently not. Was looking at something like this;
Floor Preparation System Hire - Tool Hire, Equipment Hire, Lifting Hire, Plumbing & Pipe Hire - Brandon Tool Hire - http://www.brandontoolhire.co.uk/en/surface-preparation/534-str-floor-preparation-system.html

 

[thickbed]

That will work but you might want to consider dust extraction and ask them to supply diamond cups for that STR because sanding pads wont be sufficient (in my opinion) 180sm should be 2 days work (ish)
good luck

 

[Doozy]

Thanks. Thought about two days.

Mike, if you want to message me a quote for that I'm happy to look at it pal

 

[thickbed]

Message me and I can reply with a quote