largest floor tiles

[Tony73]

scary stuff.... can't make mistake cutting or installing ... I'm on project where I will be fitting 1000x1000x20, 1000x1400x20 marble on walls and floor. And I do all templates and drawings. If I make mistake, I better leave UK :lol:

 

[Rizzle from the Portizzle]

can do by my self ray :sofahide:. did 2500x1000 ohhh yehhh it was 4mm thick :lol:

its not the fixing its moveing them about you must have arms like an oct:yikesuss:43::43::43::43:

 

[Tony73]

that is what I'm saying... had 3000x1200x4 tiles and had to cut it down to 2500x1000 and fit it. Not easy at all , Ray. And my arms are extra long :lol:, sadly, only two....

 

[Rizzle from the Portizzle]

that is what I'm saying... had 3000x1200x4 tiles and had to cut it down to 2500x1000 and fit it. Not easy at all , Ray. And my arms are extra long :lol:, sadly, only two....

what did you cut them with. were they fibra glass backed

 

[Tony73]

angle grinder... used masking tape and cut very carefully. I will actually will be going to that house next Friday, so will take some pictures

 

[Rizzle from the Portizzle]

angle grinder... used masking tape and cut very carefully. I will actually will be going to that house next Friday, so will take some pictures

next time give me a ring will lend you a cutter that will cut them in less than 10 seconds no dust and leave a perfect cut

 

[Tony73]

will do ray , Thanks

 

[AliGage]

Ray where is your place? You're in the city right?

 

[Rizzle from the Portizzle]

Ray where is your place? You're in the city right?

se16 3eh 5 minns from tower bridge

 

[AliGage]

Soon as I get an opportunity I'll pop my head in.
Should make for a comical moment. I'm about 2' taller than you