Search the forum,

Discuss Mastic bleeding out from under tiles in the Tile Adhesive / Grout Advice area at TilersForums.com.

We recently had tiled installed on a small outdoor patio. As you can see from the picture the adhesive is bleeding out on to the shed roof. Is there anything I can do to stop it? What can be used to clean it off of the flashing?

Thanks in advance for any help you can share.
 

Attachments

  • IMG_3093.jpeg
    898.9 KB · Views: 28

Reply to Mastic bleeding out from under tiles in the Tile Adhesive / Grout Advice area at TilersForums.com

There are similar tiling threads here

    • Like
  • Question
Hi, I am planning on tiling my concrete garage floor with porcelain tiles. The concrete was laid down several years ago by a previous owner, and it looks like it was also polished and sealed -...
Replies
2
Views
1K
    • Like
https://www.tilersforums.com/threads/shower-bath-tiling-preparation-plaster-and-wooden-windowsill.83462/#gsc.tab=0 There was some heated argument in the above thread! I don't have much...
Replies
1
Views
259
  • Question
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe had worn away over the past 70 years, causing a small crack in the copper. A plumber/builder fixed...
Replies
1
Views
789
    • Like
  • Question
Hi, Can't seem to find a solid answer as I realise so much depends on multiple factors. I'm planning to tile my kitchen floor with 8mm porcelain floor tiles (660x440mm). My kitchen floor is...
Replies
0
Views
2K
Hello there, Relatively recently we had a new en-suite fitted (complete rip out of the old fittings, and old wall tiles and floor carpet). This consisted of a quadrant shower enclosure, a...
Replies
5
Views
2K
Posting a tiling question to the forum? Post in Tilers' Talk if you are unsure which forum to post in. We'll move it if there's a more suitable forum.
Please visit our sponsor websites, they keep the forum free to use!

Advertisement

Top