Matting question

Wesley

TF
Arms
All, I am about to start a job and plan on using Ditra 25 over concrete. Talking to my local, very good supplier, he has suggested I try a new Ardex product under the Ditra matting. I didn’t get the name but he described it as like a sticky glue that can be troweled directly onto ‘crete before laying out matting. Has anyone used a “glue” type product under matting ?, I have previously only used thin set under matting !. Any thoughts ?!.
 
AF200 plus it's called and not that new. Yes used it and works will. Much preferred the old AF200. I'd stick to thin set if that's what you you have used before on screed. I use the AF 200 on gypsum screeds
 
AF200 plus it's called and not that new. Yes used it and works will. Much preferred the old AF200. I'd stick to thin set if that's what you you have used before on screed. I use the AF 200 on gypsum screeds
AF200 plus it's called and not that new. Yes used it and works will. Much preferred the old AF200. I'd stick to thin set if that's what you you have used before on screed. I use the AF 200 on gypsum screeds
Thanks Julian, looking at the Ardex info it does look simple and quicker to use and only a few £’s more than usual adhesive !. Think I might give it a try for this job, just to see how how it goes. What size trowel do you use to spread the material ?, is a 4.5 x 4.5 sq notch trowel suitable ?. Thanks
 
Screenshot_20190905-214833.png
Normally comes with a spreader
 
Thanks Julian, looking at the Ardex info it does look simple and quicker to use and only a few £’s more than usual adhesive !. Think I might give it a try for this job, just to see how how it goes. What size trowel do you use to spread the material ?, is a 4.5 x 4.5 sq notch trowel suitable ?. Thanks
Approximately 45m2 per 14kg tub using a B1 or 2mm x 6mm v-notch trowel
tech sheet
 
I've seen the glue used before and the screed was screed which had quite an open finish and the tiler had problems with the mat detaching , i imagine the smoother the screed the better it works .
 
Also as we all know time is money and I reckon I would be able to spread 10m of c2 whsterever you like a lot faster than ardex af 200
 

Advertisement

Which tile adhesive brand did you use most this year?

  • Palace

    Votes: 9 5.2%
  • Kerakoll

    Votes: 17 9.9%
  • Ardex

    Votes: 12 7.0%
  • Mapei

    Votes: 49 28.5%
  • Ultra Tile

    Votes: 21 12.2%
  • BAL

    Votes: 40 23.3%
  • Wedi

    Votes: 4 2.3%
  • Benfer

    Votes: 5 2.9%
  • Tilemaster

    Votes: 24 14.0%
  • Weber

    Votes: 19 11.0%
  • Other (any other brand not listed)

    Votes: 17 9.9%
  • Nicobond

    Votes: 8 4.7%
  • Norcros

    Votes: 2 1.2%
  • Kelmore

    Votes: 5 2.9%
Back
Top

Click Here to Register for Free / Remove Ad