Method of dot & dabbing boards

[peterwhayward]

Drywall, on the basis of if it aint broke don't fix it........never had a problem with it.

 

[Qwerty]

I know drywall sticks it well, when ripping it out its a nightmare to remove!!!

 

[White Room]

Drywall Addy for me. I heard recently of a guy who used it to fix tiles to concrete floors!!

Hope he did'nt dot and dab as well:ban:

 

[The D]

Mapei P9

it must be hard spot fixing PB using spots no thicker than 5mm

 

[Qwerty]

**yawn** Yes Deano

Mapei tech (& product specs) say it's good for it, so that's good enough for me

 

[The D]

crack on then kid

 

[Stef]

Drywall Addy for me. I heard recently of a guy who used it to fix tiles to concrete floors!!

Did the tiles stay put John?
I think dry wall adhesive would stick just about anything to everything..

 

[John Benton]

Did the tiles stay put John?
I think dry wall adhesive would stick just about anything to everything..

As far as I'm aware they did, not budged a 100th of a mm, was going to say inch but then ....

 

[TJ Smiler]

Dry wall adhesive for me too. Lovely to handle and when it sticks it bloody sticks. Bit smelly though but so cheap!

Often wondered if this stuff would stick tiles, be great if it could cos the build out depth is fantastic.

 

[The D]

**yawn** Yes Deano

Mapei tech (& product specs) say it's good for it, so that's good enough for me

http://www.mapei.com/public/GB/products/102_Adesilex P9_UK.PDF

 

[Qwerty]

Queried it with Mapei Tech years ago who confirmed fine to use for d&d gypsum pb

 

[The D]

so you did not look at the bit that said DO NOT use P9 for installations that require a bed depth grater than 5mm

 

[Qwerty]

I did Deano, hence why I called Tech!

The post from YOU below on the tubbed adhesive thread can be used as my response......(just change BAL to Mapei and shower to spot fixing plasterboard!)

i have not offered my opinion in this thread i have offered information from the data sheet and from BAL technical it is not me that is saying it can be used in a shower it is BAL.

 

[The D]

And the data sheet says do not use it on installations that require a bed depth grater than 5 mm so what is the point of quoting the other post

 

[Qwerty]

:mad2:**yawn**

I tell you what Deano you will be the first to know when it all comes crashing down :9: