mitre'ing metal trims

[Gazzer]

Of course if you like your tools then
http://www.proxxon-direct.com/acatalog/Cut_off_mitre_saw_KGS_80.html
Smaller one on here, 4th picture down
http://www.tool-shop.co.uk/acatalog/Table_Top_Tools.html

 

[tiler tom]

I use a hacksaw and mitre block but I make a point of cutting the mitre first then cutting to the required length that way if your mitre is slightly out you can adjust.

 

[Raja]

Hello and welcome to the forum my fellow Sheffielder finally broke the silence:lol:

 

[burncross]

yea i use shears on plastic trims, might treat myself to a small mitre saw for the metal, cheers guys for the advise