Mosaic on top of UFH

[stevebbb]

How do you lay Mosaic on top of electric UFH? Do I need level over first?

 

[DHTiling]

Yes.. use a suitable SLC for UFH.. it will need to be flat.

 

[faithhealer]

makes life easier, slc. not that I've actually done it without it before

 

[stevebbb]

Thanks for quick responses. It is also going in a Impey aquadeck so I need to keep the fall in place.

 

[hillhead]

Get the compound VERY VERY flat or your mosaic will look like rolling hills!

 

[DHTiling]

Thanks for quick responses. It is also going in a Impey aquadeck so I need to keep the fall in place.

On the Tray you can float it flat with Adhesive..

 

[stevebbb]

Cheers

 

[59peejay]

I've just done the same last week,firstly i put a light skim on the tray so that the wire just shows through this means that the falls are kept the same as if it were bare then using a plastic trowel (b&q) after it has hardened you can lay a bed down being careful with the trowel you can keep the falls, check things look equal falling to the gully using a couple of straight edges across corners and square to the gully if low or high you can remove or add adhesive as appropriate.