most user friendly epoxy...

[Spare Tool]

Have a job coming up, around 200sqm of 150x150 non slip dorsets in a water bottling plant.
Haven't used epoxy for years and was horrible stuff to use back then, what's the easiest user friendly gear available nowadays?

 

[Qwerty]

Kerakoll Fugalite bio gets my vote

 

[Italy]

Kerakoll Fugalite bio gets my vote

same, tractor

 

[Italy]

@Andystiletiling
Knowing you .... it costs too much for you. 😉
you prefer to make more effort and spend less ....
ps. fugalite bio 3kg, it costs less than 5 kg. ahah 🙂

 

[Spare Tool]

@Andystiletiling
Knowing you .... it costs too much for you. 😉
you prefer to make more effort and spend less ....
ps. fugalite bio 3kg, it costs less than 5 kg. ahah 🙂

You know me too well 🙂 however cost is not a problem on this job

 

[GoneGuy]

@Plan Tec Tiling what is the set time on the epoxy? As I was informed that another brand takes 48hrs to fully cure.

 

[One Day]

I've used them all but still go back to Mapei Kerapoxy.
I'll keep saying it; no matter what the manufacturers say (yes, you Kerakoll) it's still an epoxy and as such requires the same amount of completely OCD cleanliness when working.
For consistent results and ease of availability, for me it's Kerapoxy first, Kerapoxy CQ 2nd and Fugalite Bio 3rd.

You'll honestly need to allow the same amount of time on clean up, and oodles of white pads and sponge floats no matter what you use.
If you go with Fugalite, then it's oodles of Fugasoap / Fugawash / Cellulose sponges etc...

 

[Blunt Tool]

I did a whole bathroom walls and floors with Weber epoxy easy lately, once you do first area and get into a rhythm you still end up sobbing into your coffee and wished you did better at school!

 

[Alex Reed]

Done 150m2 of 60x60 porcelain with Mapei kerapoxy jasmine. 3 man team. One to grout, one on a buffer with lots of white pads and one to washboy two rows at a time. Used the Mapei cleaner sprays the next day. Good ish results. Bit of sagging in the odd joint but went over the next day and all in all was ok..... Can't say I want to do it again in a hurry though.... Lol

 

[Albert]

I personally don't think there is an easy epoxy 😱😱😱