I
Italy
not use anything of these products.
place only the news, although I'm not interested. 🙂
Tilers Forums Official Sponsors
place only the news, although I'm not interested. 🙂
I
Italy
😉
I
Italy
www.youtube.com/watch?v=cpsrh7tehJI
a bit of information
based on the need to use
the number of turns with the bits.
to those in need
a bit of information
based on the need to use
the number of turns with the bits.
to those in need
We have a 1200 but use the sigma rail cutter nice and light
O
Old Mod
I used the new sigma 3E4M the other day,
and it is actually better than the 3M surprisingly.
It felt lighter, not checked spec tbh.
But the larger formats were definitely more stable on the machine with the addition of the two extra plates 2/3rds of the way up.
The tile doesn’t want to fall off as before which makes getting a true straight cut easier off the rear fence.
I find with the 3M that all too often where the tile wants to lean to one side this makes the scribe go off line a little if not supported properly.
and it is actually better than the 3M surprisingly.
It felt lighter, not checked spec tbh.
But the larger formats were definitely more stable on the machine with the addition of the two extra plates 2/3rds of the way up.
The tile doesn’t want to fall off as before which makes getting a true straight cut easier off the rear fence.
I find with the 3M that all too often where the tile wants to lean to one side this makes the scribe go off line a little if not supported properly.
O
Old Mod
I have been waiting for this 🙂
O
One Day
Me too!
Recognise any elements Marc?!
There are similar tiling threads here
Featured Threads
-
- F
- W
-
- I
-
-
-
-