New UFH screed with a few cracks.

[MarkUFH]

Hi, thread over the UFH section, it's sort of moved onto prep.

Cementainous screed with some cracks. Plan to deal with as below:

1. Sand/hoover/seal? Is the seal bit needed?
2. Fill any cracks I can with Resincoat Epoxy Crack Repair Filler.
3. Kerakoll Idrobuild Tex as uncoupling membrane
4. Stick everything down with Kerakoll BioGel NO LIMITS

Good plan?

 

[Tile seller]

I'd recommend....

1)Hoover if dusty
2)Prime
3)Idrobuilds good
4)kerakoll no limits fine too

 

[Time's Ran Out]

Difficult to assess without seeing it - pictures?

 

[Flintstone]

How big and significant are the cracks ?

 

[MarkUFH]

From hairline to a few mm wide.

 

[Tile Fix Direct]

Don't risk it. Get the screed checked. Has it curled, is it anhydrite?

 

[MarkUFH]

Checked how? It's a brand new cementitious flowing screed installed in March.

 

[Ajax123]

Get the screeders back to fix it...

 

[MarkUFH]

So is it faulty? I assumed that ALL screeds will crack is some way at some point.

 

[Ajax123]

You have at least w types of cracks there... shrinkage cracks and restraintvcracks. Both are minimised by correct joint placement. Can't see any joints in that so whilst the screed material itself may or may not be faulty the installation is certainly faulty. Whybshpuld you pick up the tab for repairs when sojeone else is at faukt

 

[Spare Tool]

You been on the shandies Alan?

 

[Ajax123]

It's code....

 

[MarkUFH]

Thanks. I'll get in touch with the installers and see what they say.

 

[MarkUFH]

Installers have been a little difficult to get hold of. So I'm going it alone...

Material should all be here early next week. Wish me luck....

 

[kaharrison9]

I don't know anything about the Kerakoll uncoupler but I have never been let down with Ditra