Discuss No More Ply and Wedi Alternatives in the Canada Tile Advice area at TilersForums.com.

C

Chris Churchill

It was on my original post:

Heavy Duty Construction Board 22mm | Topps Tiles - https://www.**********.co.uk/tprod46967/heavy-duty-construction-board-22mm.html?utm_source=google-shopping&gclid=CjwKCAjw8_nXBRAiEiwAXWe2yZtG2Wtu3dMJtVOaPGy7GyNZE8oRo-DNPMAYOwAebSXx182_umi1oRoC0JQQAvD_BwE&gclsrc=aw.ds#fo_c=2258&fo_k=8c8857a8bf5780176a203808fa236ff2&fo_s=gplauk
 
C

Chris Churchill

Exactly. Not a great substitute, plus its quite thick too - which led me here to see what the alternatives are :)
So far, it looks like I'm heading towards GIFA boards and badgering a buddy with an account if needs be. But am unclear on the benefits of GIFA vs Ply for this purpose as theres little online documentation on it.
 
Why not just order NMP boards for delivery? I don't understand why that's not an option?

I ordered a load from putradhesion online without issue (I am also based in London).

Additionally, sounds like we're going down the similar route.... I've reboarded my bathroom with NMP and will tank with Schluter kerdi but gotta fix the floor first. Anyway I'm really impressed with strength of the product for it's size.... I need that strength for the size of the tiles I'm fixing....
 
C

Chris Churchill

Why not just order NMP boards for delivery? I don't understand why that's not an option?

I ordered a load from putradhesion online without issue (I am also based in London).

Additionally, sounds like we're going down the similar route.... I've reboarded my bathroom with NMP and will tank with Schluter kerdi but gotta fix the floor first. Anyway I'm really impressed with strength of the product for it's size.... I need that strength for the size of the tiles I'm fixing....

I would be happy to order NMP online. I just couldn't find where to get it from. Sounds like you've mastered Google more than me and found somewhere that sells it.

Would you be able to provide a link to the NMP youre using for the floor? The only one I can see on the pureadhesion site is too thin (12mm) - 12mm Tile Backer Boards, tiling board, No More Ply - https://www.pureadhesion.co.uk/no-more-ply-1200x800x12mm-tile-backer-boards.html

If that's the one you're flooring with, is that strong enough? I was looking for at least 18mm - preferably 22mm.

Either way though, sounds like you're going down the same path, so would love to hear your planned specs and end results.
 
If I can weigh in. If the floor is good then replacing it is a costly move. A product that isn't timber should you do that would give a superior surface to tile however as unlike timber it will not expand and contract. Movement is the enemy in tiling.

Anti crack mats one thing to remember is they are designed for concrete, help regarding lateral movement ie shrinkage. They are not designed to help with vertical movement, the 'bounce' of a timber floor.

If the floor is solid, slightly bias but overboard with 6mm HardieBacker. Again walls we have a 12mm board which sounds like it could be ideal.

I have attached our installation guide which may be of use. Any questions please feel free to contact me anytime on here or 07827 974021.

Regards

Luke
 

Attachments

  • 2018 HardieBacker Install Guide.pdf
    1.3 MB · Views: 46

Reply to No More Ply and Wedi Alternatives in the Canada Tile Advice area at TilersForums.com

Subscribe to Tilers Forums

There are similar tiling threads here

Hi, I'm looking for a super-thin backer board, in order to tile a stud wall on both sides and...
Replies
2
Views
7K
Hiya all, I'm a DIY gal on first bathroom. Wondered if you could check out my plans and let me...
Replies
1
Views
4K
Hi All, I’ve searched endlessly for an answer to this and can’t seem to find an answer, so I...
Replies
4
Views
3K
    • Like
Afternoon all, I am putting together a some idealised cross-section sketches to plan out...
Replies
4
Views
2K
Hi everyone, I'm looking for some advice on final floor buildup. We're installing a shower tray...
Replies
0
Views
1K

Advertisement

Thread Information

Title
No More Ply and Wedi Alternatives
Prefix
N/A
Forum
Canada Tile Advice
Start date
Last reply date
Replies
29

Which tile adhesive brand did you use most this year?

  • Palace

    Votes: 5 5.0%
  • Kerakoll

    Votes: 8 8.0%
  • Ardex

    Votes: 6 6.0%
  • Mapei

    Votes: 24 24.0%
  • Ultra Tile

    Votes: 14 14.0%
  • BAL

    Votes: 28 28.0%
  • Wedi

    Votes: 3 3.0%
  • Benfer

    Votes: 2 2.0%
  • Tilemaster /Kelmore

    Votes: 19 19.0%
  • Weber

    Votes: 18 18.0%
  • Other (any other brand not listed)

    Votes: 11 11.0%
  • Nicobond

    Votes: 5 5.0%
  • Norcros

    Votes: 3 3.0%
Top