NOT a metro splashback.

[Kyle Knowles]

Have u got some kind of jig or just freehand ?

 

[Old Mod]

Have u got some kind of jig or just freehand ?

I only 'jig' if I'm drunk!
All free hand Kyle.

 

[Flintstone]

Do you polish them back with the diamond hand pads?

 

[Kyle Knowles]

I must say I'm very impressed do u mark the angle on the tile in pencil

 

[Old Mod]

Do you polish them back with the diamond hand pads?

Use them for minor adjustments Andy,
typically 50# & 100#

 

[Old Mod]

I must say I'm very impressed do u mark the angle on the tile in pencil

No mate, just by feel.

 

[Kyle Knowles]

That makes me wanna get the grinder out and have a go at some rite now

 

[Flintstone]

No mate, just by feel.

I guess the mitre angle isn't important as long as it's more than 45

 

[Old Mod]

That makes me wanna get the grinder out and have a go at some rite now

Haha it's just repetition Kyle, I've done a massive amount over the last year.
Just don't get too near the top edge or you'll blow the front out.
Its better if you can keep the blade cool too.

 

[Old Mod]

I guess the mitre angle isn't important as long as it's more than 45

Dead right mate, if you go too far tho Andy, the finished corner is very brittle.
You end up with an edge which is much wider than the thickness of the tile, does that make sense?

 

[Kyle Knowles]

I can miter anything upto about 700 on my wet cutter but I still want a go by hand

 

[Flintstone]

I've always mitred porcelain tiles when tiling into a sloped ceiling. Just the same but a bit more refined

 

[Old Mod]

I can miter anything upto about 700 on my wet cutter but I still want a go by hand

I've never found mitring on a wet saw to be any good tbh. And I've tried many types of blade. Never stay true.

 

[Old Mod]

I've always mitred porcelain tiles when tiling into a sloped ceiling. Just the same but a bit more refined

Do you mean where the tile meets the skeiling, that's the bit you mitre, the top of the Tile?

 

[J Sid]

I've never found mitring on a wet saw to be any good tbh. And I've tried many types of blade. Never stay true.

wet cutter is just no good, much more accurate by hand and quicker
only time a wet cutter helps is to put a good edge on a cut if that's got to be mitred