Plasterboard 9.5mm weight

[WetSaw]

xx per m2,
not is Italian?
xx for sqm not is english?
confused...🙁

We've got you Europeans to thank for that, making us go metric!!

 

[Italy]

We've got you Europeans to thank for that, making us go metric!!

it's not my fault if in uk, do all to the contrary. 😛

 

[White Room]

xx per m2,
not is Italian?
xx for sqm not is english?
confused...🙁

M2 and sqm is the same meaning per square metre

 

[Dan]

xx per m2,
not is Italian?
xx for sqm not is english?
confused...🙁

It is the same mate.

Per meter squared = per M2
For square meter = for sqm

Same thing just different way of saying it.

Which is the Italian way?

10 sqm?

 

[Dan]

Should have read the full post Mark said it already.

 

[Just Rizzle]

what are the centre span of your struts 400 500 or 600
and i would use wedi washers to spread the area of contact

 

[White Room]

Should have read the full post Mark said it already.

It's called speed reading, happens all the time🙄

 

[Just Rizzle]

when u use wedi washers takes a hell of a job pulling off compared to screws.
we use them all the time when re boarding bathrooms. try and see

 

[Italy]

It is the same mate.

Per meter squared = per M2
For square meter = for sqm

Same thing just different way of saying it.

Which is the Italian way?

10 sqm?

No dan, in italy 10 mq or 10 m2
99% of the time, is 10 mq 😉

 

[gamma38]

I thought everything is based on 12.5mm boards. Studs have to be a maximum of 300mm centres as well i recall on 9mm boards.